| |
 |  Hardware & Technology Motherboards Intel Intel Discuss CUSL2 <-> 1000MHz PIII? in the Motherboards forums; is it possible to run a CUSL2 with a 1000MHz/133 PIII? thanx4info... |
|
Welcome to the ABXZone Computer Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
| | LinkBack | Thread Tools | Display Modes |
06-01-2001, 07:32 AM
| #1 |
| Registered User Join Date: Jun 2001
Posts: 1
| CUSL2 <-> 1000MHz PIII? is it possible to run a CUSL2 with a 1000MHz/133 PIII? thanx4info |
| (Offline) |  |
| Advertisement | [Remove Advertisement] |
| |
|
06-01-2001, 07:35 AM
| #2 |
| Registered User  Join Date: Mar 2001 Location: Halifax N.S Canada
Posts: 1,350
| Absolutely..  board is just fine with it... cryogen
__________________ umm nope |
| (Offline) | |
|
06-01-2001, 07:44 AM
| #3 |
| No Expert - No Guru Join Date: Feb 2001
Posts: 249
| The CUSL2 works like a champ with a 1GHz/133MHz P3 You may perhaps need to flash the bios to a more recent version to enable support for the CPU, however, most likely you won't need to. 
__________________ Habentibus Symbolum Facilis Est Transitus. |
| (Offline) | |
|
06-01-2001, 09:41 AM
| #4 |
| C1eaner  Join Date: Feb 2001 Location: TX, USA
Posts: 17,254
|  Yepper !!... ..and it overclocks mighty fine, too  Just be sure to check all the threads around here, and you'll learn a lot ! 
__________________  USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist)Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3  Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x500GbSATA_7200rpm_16MBcache Vista hp, VistaP6002_SP2  |
| (Offline) | |
|
06-01-2001, 03:35 PM
| #5 |
| Registered User  Join Date: Mar 2001 Location: Vatican City
Posts: 551
| I have two of them running a PIII 1ghz. |
| (Offline) | |
|
06-02-2001, 08:44 PM
| #6 |
| Registered User  Join Date: Feb 2001
Posts: 75
| hope this answers your question : |
| (Offline) | |
|
06-03-2001, 04:26 AM
| #7 |
| Time well wasted  Join Date: Feb 2001 Location: British Columbia
Posts: 2,276
| Are there different steppings (cBO etc) for the 1Ghz or will any retail box do? I see they're now down to US$210 around here. Time to upgrade too !! ddd |
| (Offline) | |
|
06-03-2001, 01:53 PM
| #8 |
| MODERATOR  Join Date: Feb 2001 Location: United States of America
Posts: 4,144
| Atacom shows options for different steppings of their CPUs. This is where I buy them from, so I know what I am getting. http://www.atacom.com/
__________________ Sincerely, Yoda AKA: Usa_re8e1 (when gaming) Show your support for this site by visting our advertisers... |
| (Offline) | |
|
06-03-2001, 07:25 PM
| #9 |
| Time well wasted Join Date: Feb 2001 Location: British Columbia
Posts: 2,276
| Wish my regualar site was that thorough. Thanks. ddd |
| (Offline) | |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
