Intel D875PBZLK - Page 153

**Sandog** · 12-18-2003, 05:42 PM

**CrowdAds** · [Remove Advertisement]

**Sandog** · 12-18-2003, 06:10 PM

Quote:

Originally posted by BJB
Omg... you guys are going loopy. This thread and this board getting to you fellas. hah.

Sooo... 305 in this week at DLJ Systems. Wacky.

BJB

I talked to Peter after Jim posted the good news and he is getting the boards express-shipped from the distributor but he said he would have them by next week. He explained that the distributor already has the boards and they shipped the wrong ones

. He said his Intel rep. is personally taking ahold of the matter.

Miles · 12-18-2003, 06:21 PM

Quote:

He said his Intel rep. is personally taking ahold of the matter.

This isn't per chance the same rep that's in charge of BIOS R&D is it?

**Sandog** · 12-18-2003, 06:43 PM

You guys wanna hear something funny? when I called Peter this afternoon he goes "I have some good news and some bad news", I said OK whats the good news, did you get the boards in? He said "Yes, I got the new boards in this morning". I then asked whats the bad news? He said "There the 206 boards."

It's more like a joke when the two rely on each other. I thought he was going to say he only got 3 boards in or something.

TQ · 12-18-2003, 06:48 PM

Quote:

Originally posted by lurbkie
those who dont like seeing checksum errors after flasing bios on this board should try this method which has worked for me.
b4 flashing, reboot and go into bios and press f9. it loads the default setting. then f10 to save and exit. after that try flashing the bios. you shouldnt see the checksum errors.

Thanks, l...

kaishaku · 12-18-2003, 06:56 PM

I had to order OEM because I wanted to make sure I got the 206 and that's all newegg had the 206's available in...

So I went to intel's site figuring I'd find a pdf manual, but no, nothing. Is there a manual somewhere someone has?

If not, maybe scanning one would be a good resource for this thread and all the OEM owners.

kaishaku · 12-18-2003, 07:10 PM

Hmm, guess I found some useful PDF's after all.

Technical Documentation

The Quick Reference guide looks like what I needed from a manual, if it's not the manual itself.

However, it still leaves me wondering about the Power LED. My new Antec 1080AMG case has a Power LED cable with 3 pins slots, but only two wires, nothing exists in the middle pin. So, what does this generally mean? The Antec manual does not say.

JimTram · 12-18-2003, 07:13 PM

I just got a phone call from Pete at DLJ, the boards according to Intel will arrive at DLJ tomorrow.

The board is in fact a 301.

The 302/305 was a mis-print

Jim T.

kaishaku · 12-18-2003, 07:17 PM

Quote:

However, it still leaves me wondering about the Power LED. My new Antec 1080AMG case has a Power LED cable with 3 pins slots, but only two wires, nothing exists in the middle pin. So, what does this generally mean? The Antec manual does not say.

Ok, I found the Intel docs for this, it's not labelled or on my sticker reference. J9J1 is for the 3 pin power connectors, just left of the front panel block.

Mr Steveo · 12-18-2003, 07:24 PM

Quote:

Originally posted by kaishaku
Ok, I found the Intel docs for this, it's not labelled or on my sticker reference. J9J1 is for the 3 pin power connectors, just left of the front panel block.

AKA the Message Waiting Indicator LED in the downloadable manual.

It "should" work like a charm with the Antec case.

Andy2 · 12-18-2003, 07:47 PM

How can something as small as a bios file be so difficult for supposed experts to write.

Andy2 · 12-18-2003, 07:49 PM

Intel should be glad there is no lemon law for bios programs like there is for cars.

Cole_abx · 12-18-2003, 07:51 PM

Regaurding the Pin hookups for K

I think it is for a cooling fan power hookup? Its white isn't it?

Cole

Mr Steveo · 12-18-2003, 07:57 PM

Quote:

Originally posted by Cole
Regaurding the Pin hookups for K

I think it is for a cooling fan power hookup? Its white isn't it?

Cole

Its black I believe. You cant miss it because its a three pin connector thats missing the middle pin.

lurbkie · 12-18-2003, 07:58 PM

i know this is off topic but since many of you seem to have simliar configuration as mine,anyone with antec 1080amg case. does your hdd led work? i never paid attention to frontpanel led until like today and noticed mine isnt working. tried unplug and plugging it back in but no go. i dont think i have connectors mixed up since everything is working fine

12-18-2003, 05:42 PM	#2281
Sandog Moderator Join Date: May 2003 Posts: 6,688	New C26880-206 w/Icing
(Offline)

12-18-2003, 06:43 PM	#2284
Sandog Moderator Join Date: May 2003 Posts: 6,688	You guys wanna hear something funny? when I called Peter this afternoon he goes "I have some good news and some bad news", I said OK whats the good news, did you get the boards in? He said "Yes, I got the new boards in this morning". I then asked whats the bad news? He said "There the 206 boards." It's more like a joke when the two rely on each other. I thought he was going to say he only got 3 boards in or something.
(Offline)

12-18-2003, 06:56 PM	#2286
kaishaku Registered User Join Date: Dec 2003 Posts: 78	Manual, OEM woes I had to order OEM because I wanted to make sure I got the 206 and that's all newegg had the 206's available in... So I went to intel's site figuring I'd find a pdf manual, but no, nothing. Is there a manual somewhere someone has? If not, maybe scanning one would be a good resource for this thread and all the OEM owners.
(Offline)

12-18-2003, 07:10 PM	#2287
kaishaku Registered User Join Date: Dec 2003 Posts: 78	Hmm, guess I found some useful PDF's after all. Technical Documentation The Quick Reference guide looks like what I needed from a manual, if it's not the manual itself. However, it still leaves me wondering about the Power LED. My new Antec 1080AMG case has a Power LED cable with 3 pins slots, but only two wires, nothing exists in the middle pin. So, what does this generally mean? The Antec manual does not say.
(Offline)

12-18-2003, 07:13 PM	#2288
JimTram Seabees, USN-Retired Join Date: Oct 2003 Location: Southern California Posts: 3,314	I just got a phone call from Pete at DLJ, the boards according to Intel will arrive at DLJ tomorrow. The board is in fact a 301. The 302/305 was a mis-print Jim T. __________________ ASUS P7P55D Intel i7-860 KVR 1333 4x2G Sapphire 5850 Samsung SyncMaster 940BX SB X-FI Titanium WDC640 Caviar Black, ST3300620AS Iomega eGo 1TB External HDD Sony Optiarc AD7240S, Pioneer 218L Corsair HX 620W PSU Antec 300 Gamer, Scythe 120 Fans (x3), Antec 140 Fan Win7 Home x64
(Offline)

12-18-2003, 07:47 PM	#2291
Andy2 Registered User Join Date: Aug 2003 Location: Pennsylvania Posts: 256	How can something as small as a bios file be so difficult for supposed experts to write.
(Offline)

12-18-2003, 07:49 PM	#2292
Andy2 Registered User Join Date: Aug 2003 Location: Pennsylvania Posts: 256	Intel should be glad there is no lemon law for bios programs like there is for cars.
(Offline)

12-18-2003, 07:51 PM	#2293
Cole_abx Im baaaaack ? Join Date: Nov 2003 Location: AZ Posts: 504	Regaurding the Pin hookups for K I think it is for a cooling fan power hookup? Its white isn't it? Cole __________________ *Intel 875PBZLK ver. 302 Motherboard w/ BIOS P22---- Water Cooled* 3.4GHz CPU O/C'ed @ 3536 Mhz----1 Gig of OCz High Performance Enhanced Latency DDR PC3500 -----Plextor PX-708A DVD-ReWritable Drive-----* 2 Raptor 10,000 RPM 36.7 GB WD360 In RAID-0 -----PC Power and Cooling 510 watt ATX PFC Power supply,-----Water Cooled* ATi 128MB 9800 Pro AIW Videocard-----KDS 17" FPD Monitor-----Creative 2.1 100 watt sound system-----Turtle Beach Santa Cruz 6.1 channel Soundcard-----**Koolance EXOS all Aluminum external Water Cooling Unit ----- Zalman ZM-MFC1 Multi-Fan Speed control unit with 4 Antec Double ball-bearing 80mm Stealth fans ------ Aqua Blue clear Acrylic case**
(Offline)

12-18-2003, 07:58 PM	#2295
lurbkie Registered User Join Date: Dec 2003 Posts: 120	i know this is off topic but since many of you seem to have simliar configuration as mine,anyone with antec 1080amg case. does your hdd led work? i never paid attention to frontpanel led until like today and noticed mine isnt working. tried unplug and plugging it back in but no go. i dont think i have connectors mixed up since everything is working fine
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode