Intel DP45SG (Skyburg) - Page 154

hawkeyelom · 05-19-2009, 09:59 PM

Quote:

Originally Posted by preyingrazor

Heads up: ATI Catalyst 9.5 now available at The Ultimate Experience for Gaming | GAME.AMD.COM

!!BUT!!

before you install it read this:

ATI Catalyst 9.5 Vista Driver Analysis Final Thoughts :: TweakTown

Performance drops are seen with most graphics cards. Especially the 4850. Not sure how crossfire is scaling yet though.

------------------------------
Thanks for the heads up, I won't be installing this driver--also skipped 9.4 and 9,3 no problems with anything so far

WolfSoul · 05-20-2009, 06:21 PM

New bench...

preyingrazor · 05-23-2009, 11:09 AM

That's a great bench. And you don't need to worry about the minimum speed. For all intents and purposes the minimum speed is around 100MB/s becuase you'll never fill up the whole drive.

**Sandog** · 05-29-2009, 06:49 PM

Just installed Vista with SP2. Anybody remember how to stop the IDT audio control panel from opening each time Vista loads? I have the ACP popping up each boot-up.

Thanks,
Sandog

snoylekim · 05-29-2009, 07:23 PM

Quote:

Originally Posted by Sandog

Just installed Vista with SP2. Anybody remember how to stop the IDT audio control panel from opening each time Vista loads? I have the ACP popping up each boot-up.

Thanks,
Sandog

Darn... It was open with the first boot after my sp2 update .. I think I just cycled thru some options and closed it ..Haven't seen it since ..

hawkeyelom · 05-29-2009, 08:04 PM

Quote:

Originally Posted by Sandog

Just installed Vista with SP2. Anybody remember how to stop the IDT audio control panel from opening each time Vista loads? I have the ACP popping up each boot-up.

Thanks,
Sandog

I had the same problem (also after the last IDT update). I just tested the sound and reset preferences and then rebooted--Had to do that two or three times before it stoped appearing.

Also check msconfig startup--two different IDT items need to be checked---If i remember correctly they were.

Good luck.

**Sandog** · 05-29-2009, 08:31 PM

Yep two different IDT's. Saw that a week ago. I think that is why it didn't work. I went to where it says 'show desktop icon' which disables it from starting up but I guess I had to do it twice.

Thanks Hawk,

Sandog

PS. I am hoping to eventually get a back plate for my GTX 285 but I don't think it will fit if I do because the RAM modules latches are almost touching the card already.

hawkeyelom · 05-30-2009, 03:06 AM

Quote:

Originally Posted by Sandog

Yep two different IDT's. Saw that a week ago. I think that is why it didn't work. I went to where it says 'show desktop icon' which disables it from starting up but I guess I had to do it twice.

Thanks Hawk,

Sandog

I think you meant system tray icon, not destop icon: n'est-ce pas?

preyingrazor · 05-30-2009, 03:24 AM

Quote:

Originally Posted by Sandog

PS. I am hoping to eventually get a back plate for my GTX 285 but I don't think it will fit if I do because the RAM modules latches are almost touching the card already.

What plate are you referring to? The one on the graphics card heat sink (heat shroud) or the backplate that fits into the computer casing to secure the card? And what purpose does it serve?

**Sandog** · 05-30-2009, 09:49 AM

Quote:

Originally Posted by hawkeyelom

I think you meant system tray icon, not destop icon: n'est-ce pas?

Yes I did mean system tray. I think I saw two IDT's in Vista Defender. I was using it to disable programs earlier. I've been tweaking Vista for performance like disabling disk indexing and ReadyBoost.

**Sandog** · 05-30-2009, 09:56 AM

Quote:

Originally Posted by preyingrazor

What plate are you referring to? The one on the graphics card heat sink (heat shroud) or the backplate that fits into the computer casing to secure the card? And what purpose does it serve?

I'm sorry, I mean the one you can buy for the back of your NVidia GTX 285 card.
EVGA | Products | Product List
It serves no purpose other than making the card look cool and protect the back of it. I can possibly fit a knife blade between my video card and the RAM socket latches. I wish Intel would address this problem along with putting SATA plugs near the video card to.

preyingrazor · 05-30-2009, 03:29 PM

Oh snap! That's a sexy looking heat shroud. Loving it. You're going ATI on your 295. haha. go red!

OldDeadOne · 06-04-2009, 06:34 AM

Been awful quiet here,guess things are peachy?

preyingrazor · 06-04-2009, 07:29 AM

It's ironically almost sad, isn't it? I was enjoying the comradarie.

New GUI version of Intel LinPack Burn In test released:

http://www.ultimate-filez.com/files/IntelBurnTest.zip

**Sandog** · 06-04-2009, 08:13 AM

I have a fresh copy of Vista installed and imaged. I am considering installing Win7 now.

05-20-2009, 06:21 PM	#2297
WolfSoul Registered User Join Date: Feb 2009 Location: Belgium Posts: 327	Re: Intel DP45SG (Skyburg) New bench... __________________ Antec 900/6 TRiCool fans - Antec Truepower Trio 650 Watt -Intel DP45SG - Q9550 - 2 X 2 GB Kingston -Valueram DDR3-1333 - Gigabyte Nvidia GTX 285 1024 MB GDDR3 - Creative Soundblaster Titanium PCI-E -1 X 500 GB Samsung systemdrive -3X 1 TB Samsung (2 X Spinpoint F2 and 1 X Spinpoint F3) - Samsung Super Writemaster - Logitech X-540 5.1 System - Acer 24 " H243H --------------------------------------------------------------------- Spare Red case (cheap brand) - Antec Earthwatts 500 W - Asrock Wolfdale Glan R2.0 - E5200 changing to E7400 not delivered yet.. - 2 x 2 GB DDR2 667 (Corsair & Aeneon) - Club3D 8500 GT - Samsung 500 GB & WD 500 GB & Hitachi 750 GB in spare - Crap compaq crt monitor
(Offline)

05-23-2009, 11:09 AM	#2298
preyingrazor Registered User Join Date: Dec 2008 Location: Southampton, UK Posts: 664	Re: Intel DP45SG (Skyburg) That's a great bench. And you don't need to worry about the minimum speed. For all intents and purposes the minimum speed is around 100MB/s becuase you'll never fill up the whole drive. __________________ Q9650 3GHz @ 3.4GHz \| DP45SG @ 121 \| 8GB Kingston ValueRAM 1066MHz @ 1206MHz DDR3 \| 2x Palit Radeon HD 4850 512MB in CrossfireX \| 2x 300GB WD VelociRaptor HDD RAID 0 \| 500GB WD Caviar HDD \| Creative Sound Blaster X-Fi Titanium - Fatal1ty Professional Series PCIe soundcard \| 2x 500GB Iomega external USB2.0 HDD \| 1TB external LaCie eSATA HDD \| 650W CoolerMaster eXtreme power supply \| CoolerMaster Elite 330 Black Case \| ThermalRight Ultra 120 Extreme processor heat sink \| 26" Samsung T260 1080p \| Logitech X-540 5.1 Speakers System pics
(Offline)

05-29-2009, 06:49 PM	#2299
Sandog Moderator Join Date: May 2003 Posts: 6,688	Re: Intel DP45SG (Skyburg) Just installed Vista with SP2. Anybody remember how to stop the IDT audio control panel from opening each time Vista loads? I have the ACP popping up each boot-up. Thanks, Sandog
(Offline)

05-29-2009, 08:31 PM	#2302
Sandog Moderator Join Date: May 2003 Posts: 6,688	Re: Intel DP45SG (Skyburg) Yep two different IDT's. Saw that a week ago. I think that is why it didn't work. I went to where it says 'show desktop icon' which disables it from starting up but I guess I had to do it twice. Thanks Hawk, Sandog PS. I am hoping to eventually get a back plate for my GTX 285 but I don't think it will fit if I do because the RAM modules latches are almost touching the card already.
(Offline)

05-30-2009, 03:29 PM	#2307
preyingrazor Registered User Join Date: Dec 2008 Location: Southampton, UK Posts: 664	Re: Intel DP45SG (Skyburg) Oh snap! That's a sexy looking heat shroud. Loving it. You're going ATI on your 295. haha. go red! __________________ Q9650 3GHz @ 3.4GHz \| DP45SG @ 121 \| 8GB Kingston ValueRAM 1066MHz @ 1206MHz DDR3 \| 2x Palit Radeon HD 4850 512MB in CrossfireX \| 2x 300GB WD VelociRaptor HDD RAID 0 \| 500GB WD Caviar HDD \| Creative Sound Blaster X-Fi Titanium - Fatal1ty Professional Series PCIe soundcard \| 2x 500GB Iomega external USB2.0 HDD \| 1TB external LaCie eSATA HDD \| 650W CoolerMaster eXtreme power supply \| CoolerMaster Elite 330 Black Case \| ThermalRight Ultra 120 Extreme processor heat sink \| 26" Samsung T260 1080p \| Logitech X-540 5.1 Speakers System pics
(Offline)

06-04-2009, 06:34 AM	#2308
OldDeadOne Registered User Join Date: Jan 2009 Location: hicksville,West Virginia Posts: 192	Re: Intel DP45SG (Skyburg) Been awful quiet here,guess things are peachy? __________________ Computer nut since the 70's Old System:POOF New System: DP45SG motherboard/cooler master 690 case/cooler master 650w psu/4 gigs mushkin memory/500 gig WD Caviar drive/ EVGA GTX 260 216 core/Q6600 cpu/liteon DVD burner/Vista 64 bit/Bios116
(Offline)

06-04-2009, 07:29 AM	#2309
preyingrazor Registered User Join Date: Dec 2008 Location: Southampton, UK Posts: 664	Re: Intel DP45SG (Skyburg) It's ironically almost sad, isn't it? I was enjoying the comradarie. New GUI version of Intel LinPack Burn In test released: http://www.ultimate-filez.com/files/IntelBurnTest.zip __________________ Q9650 3GHz @ 3.4GHz \| DP45SG @ 121 \| 8GB Kingston ValueRAM 1066MHz @ 1206MHz DDR3 \| 2x Palit Radeon HD 4850 512MB in CrossfireX \| 2x 300GB WD VelociRaptor HDD RAID 0 \| 500GB WD Caviar HDD \| Creative Sound Blaster X-Fi Titanium - Fatal1ty Professional Series PCIe soundcard \| 2x 500GB Iomega external USB2.0 HDD \| 1TB external LaCie eSATA HDD \| 650W CoolerMaster eXtreme power supply \| CoolerMaster Elite 330 Black Case \| ThermalRight Ultra 120 Extreme processor heat sink \| 26" Samsung T260 1080p \| Logitech X-540 5.1 Speakers System pics Last edited by preyingrazor; 06-04-2009 at 08:02 AM..
(Offline)

06-04-2009, 08:13 AM	#2310
Sandog Moderator Join Date: May 2003 Posts: 6,688	Re: Intel DP45SG (Skyburg) I have a fresh copy of Vista installed and imaged. I am considering installing Win7 now.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode