OVERCLOCKING the Intel DP45SG

[preyingrazor]

Originally Posted by hankx18

Damnit wheres the idcc and bios update!

Intel DP45SG (Skyburg)

[CrowdAds]

[Oboema]

Oke since the IDCC tool is out in beta form i'm playing around with some settings

I have a E8500 and OCZ3X1333 2G modules

These are my memory specs out of everest

DIMM1: OCZ OCZ3X13332G ]

    Memory Module Properties:
      Module Name                                       OCZ OCZ3X13332G
      Serial Number                                     None
      Manufacture Date                                  Week 28 / 2007
      Module Size                                       2 GB (2 ranks, 8 banks)
      Module Type                                       Unbuffered DIMM
      Memory Type                                       DDR3 SDRAM
      Memory Speed                                      DDR3-1066 (533 MHz)
      Module Width                                      64 bit
      Error Detection Method                            None
      DRAM Manufacturer                                 OCZ

    Memory Timings:
      @ 533 MHz                                         6-6-6-16  (CL-RCD-RP-RAS) / 27-59-4-8-4-4  (RC-RFC-RRD-WR-WTR-RTP)
      @ 444 MHz                                         5-5-5-14  (CL-RCD-RP-RAS) / 23-49-3-7-4-4  (RC-RFC-RRD-WR-WTR-RTP)

    Extreme Memory Profile:
      Profile Name                                      Enthusiast (Certified)
      Memory Speed                                      DDR3-1333 (667 MHz)
      Voltage                                           1.75 V
      @ 666 MHz                                         7-7-7-20  (CL-RCD-RP-RAS) / 34-1285-0-20-10-5-9  (RC-RFC-CR-RRD-WR-WTR-RTP)
      @ 571 MHz                                         6-6-6-18  (CL-RCD-RP-RAS) / 29-1102-0-18-9-5-8  (RC-RFC-CR-RRD-WR-WTR-RTP)
      @ 476 MHz                                         5-5-5-15  (CL-RCD-RP-RAS) / 24-918-0-15-8-4-6  (RC-RFC-CR-RRD-WR-WTR-RTP)

My FSB is now in 345 and my core speed is 3.28 Ghz.

I'm a bit uncertain of my memory settings.
I've set the memory voltage to 1.75V and the timmings are
@ 533 MHz (1066) 6-6-6-16 with memory ref freq. on 333
But i want to increase the FSB to 360 which memory settings shall i use ?

[Oboema]

Ok I'm now running on 3.6 Ghz FSB on 380 and memory is on 6-6-6-18.

[hariskhan001]

IDCC not woking on my DP45SG whn i start IDCC my system Gone to b restarted?
M using windows XP SP3 with lattest bios version.....
please help me some 1

[Sk00maKing]

Heya all, i am new to this forum, but it is the most complete series of threads on the dp45sg that ive found on the net.

I your opinion on a choice i must make now.

I have two kits of OCZ memory:

The 2x2gb ocz fatal1ty edition ddr3 1333mhz (i can't post any urls...) that is currently running in my rig (dp45sg combined with E8400) it is rock stalbe, no OC yet.

And i have the OCZ intel extreme 2x2gb ddr3-1600 kit that i had bought previously bought for a client.

So my question is, i must sell one of the kits, i am not planning any OC yet, but as i know myself, i will do. BUT it seems to be problematic on this board to use some 1600 ddr3.

So what you guys would do? Stick with the 1333 and try to push it, or put the 1600 i try for the board stability?

Thanx for advises!
Sk00maKing

[preyingrazor]

Try OC'ing with both and see what u get best stability with.

[hawkeyelom]

You could try both sets as suggested, but I would tend to think that could cause problmes in seating and removing etc.

I would go with the stable 1300 set, the 1600 I don't think buys you anything---so sell that set--just my opinion.

[Sandog]

Originally Posted by hariskhan001

IDCC not woking on my DP45SG whn i start IDCC my system Gone to b restarted?
M using windows XP SP3 with lattest bios version.....
please help me some 1

Welcome to ABXZone!

You have to turn on Firewire in BIOS or else IDCC won't run, its a bug.

I have had 0 luck OC this board and have tried 3 different 1600 DDR3 sticks. SuperTalent, Wintec, Mushkin, none of them worked. The best I could get was pushing the memory FSB at 1066 and even then the system was not stable plus you get the double starts. Stick to plain 1333 and you won't have any problems plus it is fast. Others users might have better success but I give up.

[hariskhan001]

Originally Posted by Sandog

Welcome to ABXZone!

You have to turn on Firewire in BIOS or else IDCC won't run, its a bug.

I have had 0 luck OC this board and have tried 3 different 1600 DDR3 sticks. SuperTalent, Wintec, Mushkin, none of them worked. The best I could get was pushing the memory FSB at 1066 and even then the system was not stable plus you get the double starts. Stick to plain 1333 and you won't have any problems plus it is fast. Others users might have better success but I give up.

Thnxxxx Sandog...whn i enable firewire port frm my Bios...itz working fine......
Can u tell me how i can overclock through Bios or IDCC
I have E2180 and DDR3 kingston 1333 4Gb ram......
ll' b very thankful to u.......

[hariskhan001]

Sandog n others respectable members of this thread please help me abt overclocking DP45SG with dual core E2180.....
How can i overclock abt FSB n voltages...
ll b thankful to u all

[preyingrazor]

Originally Posted by hariskhan001

Sandog n others respectable members of this thread please help me abt overclocking DP45SG with dual core E2180.....
How can i overclock abt FSB n voltages...
ll b thankful to u all

Here u go:

OVERCLOCKING the Intel DP45SG

[lemorce]

hello every body
i'am new in the forums, and i speek english very bad, sorry about that.
Please, i have a question to anybody who can help me, and the question is:
which is the best memory: KHX1333C7D3K2/4G or KHX11000D3K2/4G for overclocking the DP45SG ? or other, i don't know.

I have a DP45SG mobo and Q9550 @ 2.86ghz.
Only need the RAM and i looking for the best for overcloking my CPU to 3.2 or 3.4, i will be very happy if i manage this numbers.I am new in overcloking issues, and i need be advised by the forums.

thank in advanced

[preyingrazor]

to the board and forum!

These are the spec sheets for both:

KHX1333: Kingston Technology Company - Kingston Memory Search - Search Results for: KHX1333C7D3K2/4G

KHX1100: Kingston Technology Company - Kingston Memory Search - Search Results for: KHX11000D3K2/4G

I'd go for the 1333 simply because it is rated for 1.5 volts (compared to 1.6V for the other type). The board fares very well with memory rated for 1.5V. Problems have been known to occur with other voltages.

Additionally, it has tighter timings: CL 7 compared to CL 9.

So go for KHX1333C7D3K2/4G

[lemorce]

Preyingrazor, thank you very much for answer me so quickly.
both say: the SPDs are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V.
the diferent are in:
KHX1100 run 1375MHz at a latency timing of 9-9-9 at 1.6V
and
KHX1333 run 1333MHz at a low latency timing of 7-7-7-20 at 1.7V
you understand my doubt ?

[lemorce]

you did not have to touch your 8GB Kingston 1333MHz DDR3 for you overclocking ?, i mean, these remain at 1.5v and the original latency ?
other question, how is about G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Dual Channel Kit, I have heard that that also can serve