"P4C800-E Deluxe" OC'ing tips etc. - Page 14

btv94 · 02-06-2004, 10:58 AM

Quote:

Originally posted by BBThumper
.....nice company. I buy alot of stuff here:

http://www.frozencpu.com/cgi-bin/frozencpu/vid-20.html

......cheaper here, I have always dealt with then in the past:

http://www.sidewindercomputers.com/swmc3.html

....these are nice too :

http://www.sidewindercomputers.com/minochcokit.html

Would this work with my slk-947? anyone use this combination?

Thanks,

**CrowdAds** · [Remove Advertisement]

BBThumper · 02-06-2004, 11:23 AM

......not sure but what I can tell you is its the same size around as the default passive HS you have now. Just alot taller. Hope this helps.....

DraGoNsLaYeR786 · 02-06-2004, 02:51 PM

Quote:

Originally posted by BBThumper
.....nice company. I buy alot of stuff here:

http://www.frozencpu.com/cgi-bin/frozencpu/vid-20.html

......cheaper here, I have always dealt with then in the past:

http://www.sidewindercomputers.com/swmc3.html

....these are nice too :

http://www.sidewindercomputers.com/minochcokit.html

excuse my n00bness but when would you need a chipset cooler?
what would you overclock?

And whats a good temperature for my 3.2gHz to be at with this card with normal use such as browsing sites

btv94 · 02-06-2004, 03:24 PM

Quote:

Originally posted by BBThumper
......not sure but what I can tell you is its the same size around as the default passive HS you have now. Just alot taller. Hope this helps.....

I have to look at the clearance when I got home.

Thanks for the info,

btv94 · 02-06-2004, 10:47 PM

Swiftech MCX159-R will not work with my slk-947, it will run into the clip that hold 92mm fan. It could work if i use 80mm fan instead.

What is CPUID Maximum Value limit ? What does it do when enable? or disable.

Thanks,

BBThumper · 02-06-2004, 10:53 PM

CPUID Maximum Value limit=disabled I believe. Never tried it any other way......

btv94 · 02-06-2004, 11:49 PM

For memory setting, what are these settings and how do you adjust them?

DRAM Idle Timer
DRAM Refresh Rate
Performance Acceration Mode [auto or enable]

I have everything set at auto as of now and running at
fsb287
5:4 [2-2-2-5] @3.2v vdimm

I can run 290 but not stable. not sure if i hit the limit or not.

btv94 · 02-07-2004, 11:46 AM

I started memtest86 last night and so far it has gone through 12 hrs 100 pass with no error.

Is this long enough to conclude the memory is ok?

Thanks,

Sierra_abx · 02-22-2004, 12:54 PM

Anyone know what's happened to DanX? He started this great thread a while back. But haven't heard from him recently.

DanX · 02-23-2004, 03:43 AM

I'm still here !

I am still keeping an eye on it, but since I'm not "tuning" my rigg anymore I'm kind of out of the game so to speek.

DanX · 02-23-2004, 03:50 AM

>> btv94 (memtest 12h)

Thats more than enough !
Your memory works well.

>> btv94 (CPUID Maximum Value Limit)

That param has nothing to do with performance,
its a compatibility option fo older OS's

As for your questions regarding memory setting you should take a look at the 1st post in this thread.
Actually MANY of you would find the answers to your questions if you just had the patience to read it

Sierra_abx · 02-23-2004, 10:50 AM

Quote:

Originally posted by DanX
I'm still here !

I am still keeping an eye on it, but since I'm not "tuning" my rigg anymore I'm kind of out of the game so to speek.

Nice to hear from you again.

DanX · 02-23-2004, 11:20 AM

I Wouldn't leave ABXZone !It's a great forum.
And a fountain of info for people with computer issues

treyeod · 02-25-2004, 10:59 PM

im new to o/cing and just started messing around last night with some advice from PCBruiser, got my 2.8C to 3.219 with Muskin Lvl II Black running 230FSB 1:1 23258T @2.85, got it to 233 with no problems but wouldn't boot @ 235, gonna run Memtest all night, i have kept the same timings and ratio, haven't attempted to go further, anyone have experience with the same setup?

Elixir · 02-26-2004, 11:47 AM

My "race" settings for P4C800-E DLX, 4.4GHz (P4 3.4C @) test rig

CPU Frequenzy: 200MHz
DRAM Frequenze: 400MHz
AGP/PCI Frequenzy: 66MHz/33MHz (Locked)
CPU Voltage: 1.775V
DRAM Voltage: 2.85V
AGP Voltage: 1.8V (This have really big influence when overclocking)
Performance Mode: Turbo

DRAM CAS# Latency: 2
DRAM RAS# Precharge: 2
DRAM RAS# to CAS# Delay: 2
DRAM Precharge Delay: 5
DRAM Burst Lenght: 4
Performance Acceleration Mode: Enabled
DRAM Idle Time: Infinite
DRAM Refresh Rate: 7.8µsec
Spread Spectrum: Disabled
MPS Revision: 1.4

After setting up these, I boot up to windows, and increase the frequenzy with clockgen. With this method, I get additional turbos equal to 70MHz (200FSB boot-trick).

These are really mean settings, but faster you cant get

02-06-2004, 11:23 AM	#197
BBThumper Happy, Joyous and Free Join Date: Jun 2003 Location: Philly Posts: 2,024	......not sure but what I can tell you is its the same size around as the default passive HS you have now. Just alot taller. Hope this helps..... __________________ ASUS M3A32-MVP Deluxe AMD Phenom 9600 XP-90c w/ a T.T. 92mm fan 2 x 2gig pc26400 Nvidia 8400 2 x Raptors in Raid 0 ......My City's moto: Welcome to Philly, now get the heck out!!!!!!!
(Offline)

02-06-2004, 10:47 PM	#200
btv94 Registered User Join Date: Jan 2004 Location: Orange County, Ca Posts: 115	Swiftech MCX159-R will not work with my slk-947, it will run into the clip that hold 92mm fan. It could work if i use 80mm fan instead. What is CPUID Maximum Value limit ? What does it do when enable? or disable. Thanks, __________________ P4C800-E (Bios 1023) 3.4C (FSB212) 1.55v Thermalright SLK-947 G.SKILL 2X1G (2GBHX 2-3-2-5) 2.65v Patriot 2X512 (XBLK 2-3-2-5)2.65V ATI AIW X800XT 256MB 2X 36G RAPTOR RAID0 160 SATA on Promise SATA_RAID2 200G IDE on Promise PRI_RAID Themaltake W11 480W AUDIGY2 ZS NEC 16X Double Layer DVD±RW Drive SAMSUNG 16X-DVD WIN XP PRO SP2 Sony SDM-HS95P/B
(Offline)

02-06-2004, 10:53 PM	#201
BBThumper Happy, Joyous and Free Join Date: Jun 2003 Location: Philly Posts: 2,024	CPUID Maximum Value limit=disabled I believe. Never tried it any other way...... __________________ ASUS M3A32-MVP Deluxe AMD Phenom 9600 XP-90c w/ a T.T. 92mm fan 2 x 2gig pc26400 Nvidia 8400 2 x Raptors in Raid 0 ......My City's moto: Welcome to Philly, now get the heck out!!!!!!!
(Offline)

02-06-2004, 11:49 PM	#202
btv94 Registered User Join Date: Jan 2004 Location: Orange County, Ca Posts: 115	For memory setting, what are these settings and how do you adjust them? DRAM Idle Timer DRAM Refresh Rate Performance Acceration Mode [auto or enable] I have everything set at auto as of now and running at fsb287 5:4 [2-2-2-5] @3.2v vdimm I can run 290 but not stable. not sure if i hit the limit or not. __________________ P4C800-E (Bios 1023) 3.4C (FSB212) 1.55v Thermalright SLK-947 G.SKILL 2X1G (2GBHX 2-3-2-5) 2.65v Patriot 2X512 (XBLK 2-3-2-5)2.65V ATI AIW X800XT 256MB 2X 36G RAPTOR RAID0 160 SATA on Promise SATA_RAID2 200G IDE on Promise PRI_RAID Themaltake W11 480W AUDIGY2 ZS NEC 16X Double Layer DVD±RW Drive SAMSUNG 16X-DVD WIN XP PRO SP2 Sony SDM-HS95P/B
(Offline)

02-07-2004, 11:46 AM	#203
btv94 Registered User Join Date: Jan 2004 Location: Orange County, Ca Posts: 115	I started memtest86 last night and so far it has gone through 12 hrs 100 pass with no error. Is this long enough to conclude the memory is ok? Thanks, __________________ P4C800-E (Bios 1023) 3.4C (FSB212) 1.55v Thermalright SLK-947 G.SKILL 2X1G (2GBHX 2-3-2-5) 2.65v Patriot 2X512 (XBLK 2-3-2-5)2.65V ATI AIW X800XT 256MB 2X 36G RAPTOR RAID0 160 SATA on Promise SATA_RAID2 200G IDE on Promise PRI_RAID Themaltake W11 480W AUDIGY2 ZS NEC 16X Double Layer DVD±RW Drive SAMSUNG 16X-DVD WIN XP PRO SP2 Sony SDM-HS95P/B
(Offline)

02-22-2004, 12:54 PM	#204
Sierra_abx Registered User Join Date: Sep 2003 Posts: 13,880	Anyone know what's happened to DanX? He started this great thread a while back. But haven't heard from him recently.
(Offline)

02-23-2004, 03:43 AM	#205
DanX Registered User Join Date: Nov 2003 Location: Sweden Posts: 131	I'm still here ! I am still keeping an eye on it, but since I'm not "tuning" my rigg anymore I'm kind of out of the game so to speek. __________________ Asus P4C800-E Deluxe P4 2.6C@3.3GHz 2x A-DATA 512Mb PC4000 FSB 1020MHz 1:1 ATI Radeon X800PRO @ X800XT PE
(Offline)

02-23-2004, 03:50 AM	#206
DanX Registered User Join Date: Nov 2003 Location: Sweden Posts: 131	>> btv94 (memtest 12h) Thats more than enough ! Your memory works well. >> btv94 (CPUID Maximum Value Limit) That param has nothing to do with performance, its a compatibility option fo older OS's As for your questions regarding memory setting you should take a look at the 1st post in this thread. Actually MANY of you would find the answers to your questions if you just had the patience to read it __________________ Asus P4C800-E Deluxe P4 2.6C@3.3GHz 2x A-DATA 512Mb PC4000 FSB 1020MHz 1:1 ATI Radeon X800PRO @ X800XT PE Last edited by DanX; 02-23-2004 at 11:21 AM..
(Offline)

02-23-2004, 11:20 AM	#208
DanX Registered User Join Date: Nov 2003 Location: Sweden Posts: 131	I Wouldn't leave ABXZone !It's a great forum. And a fountain of info for people with computer issues __________________ Asus P4C800-E Deluxe P4 2.6C@3.3GHz 2x A-DATA 512Mb PC4000 FSB 1020MHz 1:1 ATI Radeon X800PRO @ X800XT PE
(Offline)

02-25-2004, 10:59 PM	#209
treyeod Registered User Join Date: Oct 2003 Location: Ft. Walton Beach, FL Posts: 208	im new to o/cing and just started messing around last night with some advice from PCBruiser, got my 2.8C to 3.219 with Muskin Lvl II Black running 230FSB 1:1 23258T @2.85, got it to 233 with no problems but wouldn't boot @ 235, gonna run Memtest all night, i have kept the same timings and ratio, haven't attempted to go further, anyone have experience with the same setup? __________________ 2.8C@3.219 on P4C800E-Deluxe 2X512 Mushkin LvlII PC3500 230FSB 1:1 23258T @2.85V Antec1080AMG Antec 430W,Zalman7000A-AlCu 2X36.7GB Raptor RAID0, 120GBWD 120GBMaxtor, Lite-On LDW811S, Lite-On48X24X48, Sapphire 9600XT, XP PRO SP1
(Offline)

02-26-2004, 11:47 AM	#210
Elixir Registered User Join Date: Dec 2003 Location: Finland Posts: 30	My "race" settings for P4C800-E DLX, 4.4GHz (P4 3.4C @) test rig CPU Frequenzy: 200MHz DRAM Frequenze: 400MHz AGP/PCI Frequenzy: 66MHz/33MHz (Locked) CPU Voltage: 1.775V DRAM Voltage: 2.85V AGP Voltage: 1.8V (This have really big influence when overclocking) Performance Mode: Turbo DRAM CAS# Latency: 2 DRAM RAS# Precharge: 2 DRAM RAS# to CAS# Delay: 2 DRAM Precharge Delay: 5 DRAM Burst Lenght: 4 Performance Acceleration Mode: Enabled DRAM Idle Time: Infinite DRAM Refresh Rate: 7.8µsec Spread Spectrum: Disabled MPS Revision: 1.4 After setting up these, I boot up to windows, and increase the frequenzy with clockgen. With this method, I get additional turbos equal to 70MHz (200FSB boot-trick). These are really mean settings, but faster you cant get
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode