| |
 |  Hardware & Technology Motherboards Intel Intel Discuss usb printer problem in the Motherboards forums; I have a problem with the usb ports. hello every body Recently I've updated my sistem with a CUSL2-... |
|
Welcome to the ABXZone Computer Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
| | LinkBack | Thread Tools | Display Modes |
06-04-2001, 02:35 PM
| #1 |
| Registered User Join Date: Jun 2001 Location: Spain
Posts: 1
|  usb printer problem I have a problem with the usb ports. hello every body Recently I've updated my sistem with a CUSL2-C, and now, I c'ant install my printer, Lexmark Z51 working trough an USB port; the system d'ont recognize it properly; appears like Unknown USB dispositive, and after I install the drivers there is no communication withe the printer. If I connect the printer to any of the additional usb ports posible in the usb bracket comming with the board, the system recognizes the printer well, like inkjet printer Z51, but i c'ant configure the printer control program because I d'ont know what is the port number for these ports. In my old M/B, Asus P3B-F, my printer work fine. Any Idea? I run a PIII 1 Ghz, 256 Mb RAM, and the Bios version is 1006a thanks |
| (Offline) |  |
| Advertisement | [Remove Advertisement] |
| |
|
06-04-2001, 03:32 PM
| #2 |
| C1eaner  Join Date: Feb 2001 Location: TX, USA
Posts: 17,254
|  USB...plug n' play...Win98se... Maybe you should just not worry too much & reinstall it...or restart the system...or unplug & plug back the usb printer cable:o It can happen often, but I always ended gettin' it done like this   ...and I never worried much 'bout a cause ...also, you didn't specify your OS, but hope this helps Oh, and WELCOME !! to the Forum 
__________________  USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist)Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3  Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x500GbSATA_7200rpm_16MBcache Vista hp, VistaP6002_SP2  |
| (Offline) | |
|
06-05-2001, 12:57 AM
| #3 |
| Made in the USA Join Date: Jun 2001 Location: New York
Posts: 36
|  SAME EXACT PROBLEM HERE!! Check out my post at: http://www.cusl2c.com/vbulletin/show...?threadid=4790 I'm having the same EXACT problem you're having with the same EXACT printer. The workaround is to plug the printer into a hub...works for me anyway. Check out my post for details of my USB nightmare! |
| (Offline) | |
|
06-05-2001, 11:01 AM
| #4 |
| MODERATOR  Join Date: Feb 2001 Location: United States of America
Posts: 4,144
| Please post in proper CPU/Chipset section, for the mainboard that you are referring to... Moving their now...
__________________ Sincerely, Yoda AKA: Usa_re8e1 (when gaming) Show your support for this site by visting our advertisers... |
| (Offline) | |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
