Temperature for Saphire 4850--1 GB

[hawkeyelom]

have the Intel DPSG45 witn an intel e8500 processor and Saphire 4850 1 GTB graphics card---I have been following the skyburg thread and noticed that some folks had posted temperature profiles that showed their graphic cards running much cooler than mine--

mine runs about ~60 C--- Everst sensor values below.

Question is the GPU temperatures in the normal range? The local company that built my system ( I beleive they are very good) tell me that this temperature is normal for this card---The catalyst CC center shows the fan at 50% of maximum


Field Value
Sensor Properties
Sensor Type Andigilog aSC7621A (SMBus 2Eh)
GPU Sensor Type Diode (ATI-Diode)

Temperatures
Motherboard 31 °C (88 °F)
CPU 26 °C (79 °F)
CPU #1 / Core #1 46 °C (115 °F)
CPU #1 / Core #2 44 °C (111 °F)
Aux 30 °C (86 °F)
GPU Diode (DispIO) 63 °C (145 °F)
GPU Diode (MemIO) 59 °C (138 °F)
GPU Diode (Shader) 58 °C (136 °F)
Seagate ST3250310AS 29 °C (84 °F)

Cooling Fans
CPU 1086 RPM
GPU 2970 RPM

Voltage Values
CPU Core 1.21 V
+2.5 V 1.15 V
+3.3 V 3.33 V
+5 V 5.08 V
+12 V 12.19 V

[CrowdAds]

[Drufuss]

Hello hawkeyelom!

If you install AtiTrayTools for example, you can adjust the temp/fan-rpm profile.
The default values of temp for 100% rpm are somewhere around 100°C.

I have an 4870X2 and this card IS HOT, and i think it's the same with the 4850. I switched to watercooling to get better temps and noise level. The card simply got too loud even when watching a dvd. Playing games was only possible with headphones.

Greetings

Dru