Multiplier's varying in CoreCenter?

little -Iron · 01-01-2007, 12:18 AM

Big trouble: On my Neo 4 Platnium[7125] which a few days after installing a Opteron dual core 170, the “CoreCenter” is showing multiplier’s that are going up + down as such: 229NHZ x10 , then 224MHZ x 8.5 or a 234MHZ x 11.5 .. I now see it going from 6-14x ??? Iam thinking the CoreCenter “ got screwed up when I went to Dual Core ? The Max multiplier in the board BIOS is 10x . Real strange ! Also, its now showing a small voltage fluxuation across the all the rails ? The latest Bios ‘v1.D’ was installed, both cores are showing up . The highest core temp was 41 gaming at 2.6MHz. I've lower it to 2.2 for now. As any one had troubles like this ?? I never had this variance in CoreCenter show up before . Please Help me out .

**CrowdAds** · [Remove Advertisement]

little -Iron · 01-07-2007, 11:32 AM

The problem is solve , on a MSI neo 4 Platinum the CoreCenter Apt. doesn't work property with a Dual core . I was getting some short freezes. I removed CoreCenter.The work around is using "PcAlert4",which reads [1] CPU+systems temps and all voltage rails. Every thing works Great now.
Also ,I found another program to check [2] core temps,called "Coretemp" .
This sure had me worried about the new Opteron 170, the screwy readings.
Hope this helps some one else..

01-01-2007, 12:18 AM	#1
little -Iron Registered User Join Date: Jul 2004 Location: Michigan Posts: 133	Multiplier's varying in CoreCenter? Big trouble: On my Neo 4 Platnium[7125] which a few days after installing a Opteron dual core 170, the “CoreCenter” is showing multiplier’s that are going up + down as such: 229NHZ x10 , then 224MHZ x 8.5 or a 234MHZ x 11.5 .. I now see it going from 6-14x ??? Iam thinking the CoreCenter “ got screwed up when I went to Dual Core ? The Max multiplier in the board BIOS is 10x . Real strange ! Also, its now showing a small voltage fluxuation across the all the rails ? The latest Bios ‘v1.D’ was installed, both cores are showing up . The highest core temp was 41 gaming at 2.6MHz. I've lower it to 2.2 for now. As any one had troubles like this ?? I never had this variance in CoreCenter show up before . Please Help me out .
(Offline)

01-07-2007, 11:32 AM	#2
little -Iron Registered User Join Date: Jul 2004 Location: Michigan Posts: 133	CoreCenter+Multiplier's The problem is solve , on a MSI neo 4 Platinum the CoreCenter Apt. doesn't work property with a Dual core . I was getting some short freezes. I removed CoreCenter.The work around is using "PcAlert4",which reads [1] CPU+systems temps and all voltage rails. Every thing works Great now. Also ,I found another program to check [2] core temps,called "Coretemp" . This sure had me worried about the new Opteron 170, the screwy readings. Hope this helps some one else..
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode