OCZ 3200 rev2 or OCZ 3700EB

[jvidia]

Folks are the OCZ 3200 rev2 mem's better than OCZ 3700EB ones ?!

After reading some reviews my impression is that 3200 rev2 OC's higher than the 3700EB, 278fsb vs 262fsb (in the anandtech.com reviews):

System :
======
Intel Pentium 4 2.4GHz (800MHz FSB)
Asus P4C800-E (875) with 1016 Release BIOS
Windows XP Professional SP1

3200 rev2 (reviewed@05-08-2004) :
===========================
557DDR
1114FSB 3-3-4-6
2.85V
INT 6169
FLT 6157

3700EB (reviewed@19-05-2004) :
========================
524DDR
1048FSB 3-2-3-6
2.85V
INT 5922
FLT 5891

Anyone tried those two ?

Any review comparing those two ?

OCZ rulez

[miwa2]

Hello Im using this ram OCZ 3200 Platinum Rev2 and Im very happy its running at 440mhz at 2-3-3-5 I see you are running a much higher bus than me so I couldnt tell anything above 450mhz.

[Super Soaker]

Had OCZ PC3200 R2 up to well over 275MHz. At this point my chip cant take the strain

[Nanobot]

My EB3500 dont do above 236Mhz stable 1/1 on my DFI @3-3-2-8 .Even slacker timing and 2T with 2.9- 3.0v +A64 tweaker yeilded no more fsb .

To top it off i'm not seeing any bandwith improvement compared to the Hynix D5 even with the OCZ at tighter timings.

I've had 2 dimms of Hynix D5 up to 279 with 9/10 ratio (mem limited) and 315x8 CPU multi 2.5 HTTmulti @1T.

I advise ppl to go Samsung base TCCD OCZ ,any left over EB in the channels are most likely bottom of the barrel,the early series seemed to be the good oc'er sticks.

[Super Soaker]

Originally Posted by Nanobot

My EB3500 dont do above 236Mhz stable 1/1 on my DFI @3-3-2-8 .Even slacker timing and 2T with 2.9- 3.0v +A64 tweaker yeilded no more fsb .

To top it off i'm not seeing any bandwith improvement compared to the Hynix D5 even with the OCZ at tighter timings.

I've had 2 dimms of Hynix D5 up to 279 with 9/10 ratio (mem limited) and 315x8 CPU multi 2.5 HTTmulti @1T.

I advise ppl to go Samsung base TCCD OCZ ,any left over EB in the channels are most likely bottom of the barrel,the early series seemed to be the good oc'er sticks.

Not necessarily, one of my friends picked up the last stick of EB at overclockers.co.uk and it was like **** off a stick

[drpino]

just bought the OCZ EL Plat Rev2's off newegg...should get to me before the end of the week. will report back.

these sticks are going in a rig i just completely bought on a whim:

AMD 64 3200+ ATHLON 64 939pin (90nm)
Thermalright XP-90 HS & Antec SmartCool 92mm Fan
Asus A8V Deluxe (Via K8T800PRO)
OCZ EL Platinum Revision 2 (2x512mb)
eVGA Limited Edition nVIDIA GeForce 6800 Video Card, 256MB GDDR3
Lian-Li PC V1000B Case
OCZ Powerstream 520w
2x74gb WD Raptors (to run in RAID 1)

[Ice_abx]

Originally Posted by drpino

just bought the OCZ EL Plat Rev2's off newegg...should get to me before the end of the week. will report back.

these sticks are going in a rig i just completely bought on a whim:

AMD 64 3200+ ATHLON 64 939pin (90nm)
Thermalright XP-90 HS & Antec SmartCool 92mm Fan
Asus A8V Deluxe (Via K8T800PRO)
OCZ EL Platinum Revision 2 (2x512mb)
eVGA Limited Edition nVIDIA GeForce 6800 Video Card, 256MB GDDR3
Lian-Li PC V1000B Case
OCZ Powerstream 520w
2x74gb WD Raptors (to run in RAID 1)

Wow, that's gonna be one heck of a rig. Let us know when you put it together.

[drpino]

will do...should have everything here by Friday so i can work on getting it together this wknd.