Who has acheived 166mhz cas2 w/ Mushkin Rev3?????

chipease4 · 02-14-2001, 02:09 AM

got this reply from mushkin:

Hi Chip,
the 128mb rev 3 consistently reaches 166mhz 2 2 2. That is the only memory we
have that will do this.
the pc150 Hsdram is 2 3 2 & runs well into the 170s.
Let us know if you have additional questions

Dorothy
Mushkin Enhanced Memory Systems
Customer Service Technician
800 569 1868 extension 209
ly from mushkin:

also this review seems to also have gotten this to 166 at cas2

http://www.lostcircuits.com/memory/rev3/

now my question is:
How many have actually attained this level of latency at this fsb?????

I know ive asked this before but dint get much replies and the highest on the cusl2 w/ the rev3 that replied is 157mhz fsb@ 2-2-2 hopefully more responses this time-pls respond all you high fsb Rev3 owners.

my current rig: 800eb@1000 Mushkin rev2 (3-3-3 7/9)

Musaki · 02-14-2001, 04:29 AM

Hi, this ram could reach 166fsb at 2-2-2 but in practice it would be more difficult cause in upper fsb like that PCI problem will come. Depending of hardware, running pci devices above 33mhz could be tricky (scsi adapter, sound card and ATA-100 adapter). Here im running Rev.3 155/155 2-2-2 5/7 rock solid ! on PIII800EB / CUSL2-LS with many fans and heatsinks. Ill try reaching 1GHz next week (would be hard ---> LS = LAN/SCSI onboard). For more info check my post in general overclocking section ---> CUSL2-LS little review part 1.

Cya l8r

[Edited by Musaki on 02-15-2001 at 09:42 AM]

jmsandrsn · 02-15-2001, 01:43 AM

I would give it a try if I still had my PIII 500E flip chip. The REV 3 that I have runs at least up to 157 FSB at CAS 2 in my system...this is where my PIII 700 gives out.

Winflux · 02-15-2001, 04:55 PM

I had the same problem. Was running 166 fsb, and wanted some cas2 memory to go with it. I opted for the Mushkin pc150 Hsdram. Pretty happy with it @ 166/2-3-2 7/9, but also wondering if I coulda done better with the rev3.

Winflux

Musaki · 02-16-2001, 01:08 AM

Hi, i was running with HSDRAM before changing for Rev.3. I was running at 2-3-2 7/9 166 mhz but not quite stable. For now with Rev.3 im running at 155 mhz 2-2-2 5/7 rock solid but i need to do more test.

jmsandrsn · 02-18-2001, 02:42 AM

Musaki,
Have you tried to go higher than 155 FSB (at 2-2-2) and not had any luck. Please tell us what your experience has been.

Thanks

02-14-2001, 02:09 AM	#1
chipease4 Registered User Join Date: Feb 2001 Location: Silicon Valley Posts: 353	got this reply from mushkin: Hi Chip, the 128mb rev 3 consistently reaches 166mhz 2 2 2. That is the only memory we have that will do this. the pc150 Hsdram is 2 3 2 & runs well into the 170s. Let us know if you have additional questions Dorothy Mushkin Enhanced Memory Systems Customer Service Technician 800 569 1868 extension 209 ly from mushkin: also this review seems to also have gotten this to 166 at cas2 http://www.lostcircuits.com/memory/rev3/ now my question is: How many have actually attained this level of latency at this fsb????? I know ive asked this before but dint get much replies and the highest on the cusl2 w/ the rev3 that replied is 157mhz fsb@ 2-2-2 hopefully more responses this time-pls respond all you high fsb Rev3 owners. my current rig: 800eb@1000 Mushkin rev2 (3-3-3 7/9)
(Offline)

02-14-2001, 04:29 AM	#2
Musaki GOA Freak !!! ;-) Join Date: Feb 2001 Location: QC, CA Posts: 62	Hi, this ram could reach 166fsb at 2-2-2 but in practice it would be more difficult cause in upper fsb like that PCI problem will come. Depending of hardware, running pci devices above 33mhz could be tricky (scsi adapter, sound card and ATA-100 adapter). Here im running Rev.3 155/155 2-2-2 5/7 rock solid ! on PIII800EB / CUSL2-LS with many fans and heatsinks. Ill try reaching 1GHz next week (would be hard ---> LS = LAN/SCSI onboard). For more info check my post in general overclocking section ---> CUSL2-LS little review part 1. Cya l8r [Edited by Musaki on 02-15-2001 at 09:42 AM]
(Offline)

02-15-2001, 01:43 AM	#3
jmsandrsn Registered User Join Date: Feb 2001 Location: Ohio Posts: 102	I would give it a try if I still had my PIII 500E flip chip. The REV 3 that I have runs at least up to 157 FSB at CAS 2 in my system...this is where my PIII 700 gives out.
(Offline)

02-15-2001, 04:55 PM	#4
Winflux Registered User Join Date: Feb 2001 Location: NB Posts: 16	I had the same problem. Was running 166 fsb, and wanted some cas2 memory to go with it. I opted for the Mushkin pc150 Hsdram. Pretty happy with it @ 166/2-3-2 7/9, but also wondering if I coulda done better with the rev3. Winflux
(Offline)

02-16-2001, 01:08 AM	#5
Musaki GOA Freak !!! ;-) Join Date: Feb 2001 Location: QC, CA Posts: 62	Hi, i was running with HSDRAM before changing for Rev.3. I was running at 2-3-2 7/9 166 mhz but not quite stable. For now with Rev.3 im running at 155 mhz 2-2-2 5/7 rock solid but i need to do more test.
(Offline)

02-18-2001, 02:42 AM	#6
jmsandrsn Registered User Join Date: Feb 2001 Location: Ohio Posts: 102	Musaki, Have you tried to go higher than 155 FSB (at 2-2-2) and not had any luck. Please tell us what your experience has been. Thanks
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode