Creating an Unattended Windows XP CD - Page 5

FB · 09-04-2003, 09:21 AM

here is my winnt.sif

anybody know if it matters what order the options are in under the headings

i.e.
[Unattended]
UnattendMode=ProvideDefault
OemSkipEula=Yes
OemPreinstall=Yes

is there a set order everything should go in, or can you just keep adding on to the list??

**CrowdAds** · [Remove Advertisement]

FB · 09-04-2003, 10:21 PM

is it possible to install the intel INFs with this setup?? it won't let me extract them with the cmd prompt

BKA · 09-04-2003, 11:42 PM

Well, after playing with this unattended setup on and off for the last couple of days. And after many, many trial and errors tests (thank God for DVD-RW's), I finally have a final Unattended Windows XP CD.

I remember going over unattended setups for Windows 2000 when I was in school getting certified, but no job I've had yet has actually used it. This gave me a chance to play around with it.

After many hours of reading and configuring, I have an Unattended Windows XP Cd that after I partion the drive (by choice, you can have that automated too), I don't have to touch the keyboard until its done.

My installs included in the Unattended Windows XP CD are:

-cable modem drivers (during install)
-onboard audio drivers (during install)
-tvtuner drivers (during install)
-XP 3D screensaver (batch file)
-TweakUI (batch file)
-Intel inf 5.0.2 (batch file)
-Directx 9.0b (batch file)
-Pre-SP2 patches(most of them, after going to Windows Update after the install, I only had 3 critical updates to install) (batch file)
-Media Player 9 (batch file)
-Nvidia 45.23 drivers (batch file)
-Office XP Pro (batch file)
-Adobe Reader 6.0 (batch file)
-Asus Probe 2.20.01 (batch file)
-Intellitype software(which I do have to go through the installmanually, which is why its last in the batch file)

The only error I recieve is from Asus Probe, something about couldn't create shell or something like that, no big deal. I beleive its because Windows hasn't fully loaded and it autoexecutes. No problems with it though, its in system tray after I get done.

The only thing I couldn't figure out was how to included the raid drivers for the textmode setup. I gave up on that, keep getting error 18 dealing with the txtsetup.oem file so I said screw it.

The whole install takes about 40 minutes from the time the system boots from CD til I install the Intellitype software. Not bad at all. I do frequent XP installs as many do here in this forum so this helps me quite a bit. A DVD burner helps a big deal too. Otherwise I would have to make two CD-RW if I wanted to include the Office XP setup.

The thing I was most worried about was installing all this stuff with no reboots, but after I finish the Intellitype software I reboot and all is good.

I was using True Image before but I really didn't understand how when you do a restore with True Image anything that was left in the recycle bin was still there after the restore. Anyways I like this better.

Good Find.

iMogal · 09-05-2003, 12:15 AM

Hey bka4u2c, can you post your Batch and SP2 update files?

BKA · 09-05-2003, 12:27 AM

I included the batch file. You can download the MS updates here

iMogal · 09-07-2003, 12:22 PM

k, I have all the hotfixes working, but this one:

Q823718_MDAC_SecurityPatch.exe
Microsoft Security Bulletin MS03-033

No mater what switches I use, it still pops open a window explaining the install.
Using these switches: '/Q:A /R:N'

Anyone have this working in 'Quite' mode?

ADDED:
Has anyone tried to include thier sound card in the instalation? I have the Audigy2.... How do I go about the silent install of it as well?

BKA · 09-07-2003, 03:16 PM

Quote:

Originally posted by iMogal
k, I have all the hotfixes working, but this one:

Q823718_MDAC_SecurityPatch.exe
Microsoft Security Bulletin MS03-033

No mater what switches I use, it still pops open a window explaining the install.
Using these switches: '/Q:A /R:N'

Anyone have this working in 'Quite' mode?

ADDED:
Has anyone tried to include thier sound card in the instalation? I have the Audigy2.... How do I go about the silent install of it as well?

Yea, I had that problem with that patch too. I didn't try to figure it out, besides the switches you stated. I just deleted it from my batch file.

I don't know what is used to install audigy drivers, setup.exe or do you have the actual .inf files to add to your $OEM$ drivers folders and include it in your winnt.sif configuration. If its a setup file, you gotta figure out what "installer" it uses and follow the instructions on the site that started this thread. Under the applications heading.

I use onboard audio so I just included the .inf files to install the drivers.

iMogal · 09-07-2003, 04:52 PM

I have finally got my disk ready, slipstreamed with SP1a, with the hotfixes & drivers ect...
Loaded up NERO, and started to set the burn as per Windows XP/SP1 Slipstreamed CD - Nero Burning Rom Procedure
The burn was successful, but when I go to boot... The CD spins up, but nothing happens. I get a blank screen with a blinking cursor. No message, no nothin'...

I'm using the microsoftcorperation.img

anyone help out?

FB · 09-07-2003, 05:34 PM

Ok, so is there one batch file, or is there more than one for this install

tamarelle · 09-07-2003, 06:17 PM

I am trying to make an unattended cd .......

its great to know that you can use a DVD+RW for the cd that will save me a lot of money as I have already gone through about 14 cd-r's with no success.

I am trying to load up my RAID drivers and using the guides posted here but I always get the same message....

something like "error 18, txtsetup.oem caused an error on line 1742 in xps1\base\boot\...etc........."

Okay I thought, I can live with manually adding in the raid drivers at boot so I TOOK OUT txtsetup.oem and removed references (I think) to it in winnt.sif, etc., and made a new cd and booted and got the SAME MESSAGE even though there was no longer a txtsetup.oem!!!!

Now it gets stranger! I took the i386 folder and deleted it, and then extracted a fresh one from my windows xp sp1 cd just to make sure some copy of txtsetup.oem was not lurking about there hidden and made a new cd and STILL I get that fricken message!!!!!!!!!

I am lost.

any ideas? anyone?

Thanks btw, to Gorgo for all your help

Tammy

BKA · 09-07-2003, 07:03 PM

Did you remove the "textmode" folder in $OEM$ that you had to create and also the [MassStorage] and [OEMBootFiles] section from the winnt.sif file?

BKA · 09-07-2003, 07:05 PM

Quote:

Originally posted by iMogal
I have finally got my disk ready, slipstreamed with SP1a, with the hotfixes & drivers ect...
Loaded up NERO, and started to set the burn as per Windows XP/SP1 Slipstreamed CD - Nero Burning Rom Procedure
The burn was successful, but when I go to boot... The CD spins up, but nothing happens. I get a blank screen with a blinking cursor. No message, no nothin'...

I'm using the microsoftcorperation.img

anyone help out?

Did you change the "Kind of emulation" to "No Emulation" and the "Number of load sectors" to "4" under the BOOT tab?

tamarelle · 09-07-2003, 07:15 PM

Quote:

Originally posted by bka4u2c
Did you remove the "textmode" folder in $OEM$ that you had to create and also the [MassStorage] and [OEMBootFiles] section from the winnt.sif file?

omigosh I did all of that except for the masstorage one!
thanks !

but don't I need to leave the masstorage in for this:

[MassStorageDrivers]
"IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL" ??

This supposedly allows your CD to be read when booting from CD during installtion.

Did you have that in your winnt.sif file bka4u2c?

iMogal · 09-07-2003, 07:17 PM

Quote:

Originally posted by bka4u2c
Did you change the "Kind of emulation" to "No Emulation" and the "Number of load sectors" to "4" under the BOOT tab?

Yes, I setup everything as per the instructions.... EXACTLY the way they have it shown....

tamarelle · 09-07-2003, 07:21 PM

Quote:

Originally posted by iMogal
Yes, I setup everything as per the instructions.... EXACTLY the way they have it shown....

imogul I bet if you used another .bin file it would work instead of that stupid microsoft.img file........

I use the xpboot.bin file ..... would you like me to email it to you?

09-04-2003, 09:21 AM	#61
FB Registered User Join Date: Sep 2002 Location: in my mind and in your hearts Posts: 24,879	here is my winnt.sif anybody know if it matters what order the options are in under the headings i.e. [Unattended] UnattendMode=ProvideDefault OemSkipEula=Yes OemPreinstall=Yes is there a set order everything should go in, or can you just keep adding on to the list?? __________________ Last edited by FB; 02-01-2006 at 02:36 AM..
(Offline)

09-04-2003, 10:21 PM	#62
FB Registered User Join Date: Sep 2002 Location: in my mind and in your hearts Posts: 24,879	is it possible to install the intel INFs with this setup?? it won't let me extract them with the cmd prompt __________________
(Offline)

09-04-2003, 11:42 PM	#63
BKA Registered User Join Date: Feb 2003 Posts: 2,095	Well, after playing with this unattended setup on and off for the last couple of days. And after many, many trial and errors tests (thank God for DVD-RW's), I finally have a final Unattended Windows XP CD. I remember going over unattended setups for Windows 2000 when I was in school getting certified, but no job I've had yet has actually used it. This gave me a chance to play around with it. After many hours of reading and configuring, I have an Unattended Windows XP Cd that after I partion the drive (by choice, you can have that automated too), I don't have to touch the keyboard until its done. My installs included in the Unattended Windows XP CD are: -cable modem drivers (during install) -onboard audio drivers (during install) -tvtuner drivers (during install) -XP 3D screensaver (batch file) -TweakUI (batch file) -Intel inf 5.0.2 (batch file) -Directx 9.0b (batch file) -Pre-SP2 patches(most of them, after going to Windows Update after the install, I only had 3 critical updates to install) (batch file) -Media Player 9 (batch file) -Nvidia 45.23 drivers (batch file) -Office XP Pro (batch file) -Adobe Reader 6.0 (batch file) -Asus Probe 2.20.01 (batch file) -Intellitype software(which I do have to go through the installmanually, which is why its last in the batch file) The only error I recieve is from Asus Probe, something about couldn't create shell or something like that, no big deal. I beleive its because Windows hasn't fully loaded and it autoexecutes. No problems with it though, its in system tray after I get done. The only thing I couldn't figure out was how to included the raid drivers for the textmode setup. I gave up on that, keep getting error 18 dealing with the txtsetup.oem file so I said screw it. The whole install takes about 40 minutes from the time the system boots from CD til I install the Intellitype software. Not bad at all. I do frequent XP installs as many do here in this forum so this helps me quite a bit. A DVD burner helps a big deal too. Otherwise I would have to make two CD-RW if I wanted to include the Office XP setup. The thing I was most worried about was installing all this stuff with no reboots, but after I finish the Intellitype software I reboot and all is good. I was using True Image before but I really didn't understand how when you do a restore with True Image anything that was left in the recycle bin was still there after the restore. Anyways I like this better. Good Find. __________________ DFI LP X58 T3eH8 i7 920(@3.5) w/Nocturna SE1366 (2) Diamond 4870 1GB (XFIRE) 12GB Corsair XMS DDR3 Windows 7 x64
(Offline)

09-05-2003, 12:15 AM	#64
iMogal Zoom Zoom... Join Date: Oct 2002 Location: Canada Posts: 1,196	Hey bka4u2c, can you post your Batch and SP2 update files? __________________ SilverStone LG-08 Asus P5E-VM HDMI Intel e8400 O/C'd 3.88Ghz 2x2Gb G.Skill DDR2-1000 (5,5,4,14) (2:3 533Mhz) Maxotr 120 Gig SATA 8Mb ATi 5850 Corsair HX620 Modular PSU Dell UltraSharp 2407FPW Monsoon MM-700 2.1 Speakers __________________
(Offline)

09-07-2003, 12:22 PM	#66
iMogal Zoom Zoom... Join Date: Oct 2002 Location: Canada Posts: 1,196	Q823718_MDAC_SecurityPatch.exe k, I have all the hotfixes working, but this one: Q823718_MDAC_SecurityPatch.exe Microsoft Security Bulletin MS03-033 No mater what switches I use, it still pops open a window explaining the install. Using these switches: '/Q:A /R:N' Anyone have this working in 'Quite' mode? ADDED: Has anyone tried to include thier sound card in the instalation? I have the Audigy2.... How do I go about the silent install of it as well? __________________ SilverStone LG-08 Asus P5E-VM HDMI Intel e8400 O/C'd 3.88Ghz 2x2Gb G.Skill DDR2-1000 (5,5,4,14) (2:3 533Mhz) Maxotr 120 Gig SATA 8Mb ATi 5850 Corsair HX620 Modular PSU Dell UltraSharp 2407FPW Monsoon MM-700 2.1 Speakers __________________ Last edited by iMogal; 09-07-2003 at 02:15 PM..
(Offline)

09-07-2003, 04:52 PM	#68
iMogal Zoom Zoom... Join Date: Oct 2002 Location: Canada Posts: 1,196	I'm stumped. I have finally got my disk ready, slipstreamed with SP1a, with the hotfixes & drivers ect... Loaded up NERO, and started to set the burn as per Windows XP/SP1 Slipstreamed CD - Nero Burning Rom Procedure The burn was successful, but when I go to boot... The CD spins up, but nothing happens. I get a blank screen with a blinking cursor. No message, no nothin'... I'm using the microsoftcorperation.img anyone help out? __________________ SilverStone LG-08 Asus P5E-VM HDMI Intel e8400 O/C'd 3.88Ghz 2x2Gb G.Skill DDR2-1000 (5,5,4,14) (2:3 533Mhz) Maxotr 120 Gig SATA 8Mb ATi 5850 Corsair HX620 Modular PSU Dell UltraSharp 2407FPW Monsoon MM-700 2.1 Speakers __________________
(Offline)

09-07-2003, 05:34 PM	#69
FB Registered User Join Date: Sep 2002 Location: in my mind and in your hearts Posts: 24,879	Ok, so is there one batch file, or is there more than one for this install __________________
(Offline)

09-07-2003, 06:17 PM	#70
tamarelle talented amateur Join Date: Feb 2001 Location: Paris, France and Florida Posts: 3,265	I am trying to make an unattended cd ....... its great to know that you can use a DVD+RW for the cd that will save me a lot of money as I have already gone through about 14 cd-r's with no success. I am trying to load up my RAID drivers and using the guides posted here but I always get the same message.... something like "error 18, txtsetup.oem caused an error on line 1742 in xps1\base\boot\...etc........." Okay I thought, I can live with manually adding in the raid drivers at boot so I TOOK OUT txtsetup.oem and removed references (I think) to it in winnt.sif, etc., and made a new cd and booted and got the SAME MESSAGE even though there was no longer a txtsetup.oem!!!! Now it gets stranger! I took the i386 folder and deleted it, and then extracted a fresh one from my windows xp sp1 cd just to make sure some copy of txtsetup.oem was not lurking about there hidden and made a new cd and STILL I get that fricken message!!!!!!!!! I am lost. any ideas? anyone? Thanks btw, to Gorgo for all your help Tammy
(Offline)

09-07-2003, 07:03 PM	#71
BKA Registered User Join Date: Feb 2003 Posts: 2,095	Did you remove the "textmode" folder in $OEM$ that you had to create and also the [MassStorage] and [OEMBootFiles] section from the winnt.sif file? __________________ DFI LP X58 T3eH8 i7 920(@3.5) w/Nocturna SE1366 (2) Diamond 4870 1GB (XFIRE) 12GB Corsair XMS DDR3 Windows 7 x64
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode