Problem installing vista ultimate 64

freakydog · 08-19-2007, 02:47 PM

ive been trying to install Windows Vista ultimate 64 bit on my new machine and everytime it goes to restart after the first steps it says windows will not start.

CPU - Intel core2quad Q6600
Motherboard - nvidia nForce 680i sli
HDD - raptor 150 gb
video card - bfg nvidia geforce 8800 gts oc 320 mb
Memory - 4 gb of OCZ dual ch reaper edition

any help would be nice

**CrowdAds** · [Remove Advertisement]

crabby · 08-19-2007, 03:09 PM

So it copies all the files... then on reboot just says 'windows wont start'? Usually the errors have more information. Have you tried installing it with just one stick of RAM installed? You can add the other sticks one at a time (with reboots in between) once you get into vista for the first time.

crabby

freakydog · 08-19-2007, 03:45 PM

ok it is now freezing after it restarts and

crabby · 08-19-2007, 04:18 PM

And what?

All your hardware is new.. what manufacturer created your motherboard? Have you checked there are no compatability issues?

Have you got anything overclocked? Have you tried underclocking anything?

crabby

freakydog · 08-19-2007, 04:29 PM

its a evga 680i mainboard. nothing over or underclocked. it went through the beginning of vista installation and on first reboot it goes to the black screen with the green bar and freezes after a few seconds. I havent tried reducing memory to 1 gig yet though....

Snuffy · 08-19-2007, 05:52 PM

680i chipset - Obviously you are aware of the worldwide RAID issues with this chipset.

Have you upgraded to the latest BIOS?
Do you have the x64 Vista drivers in a special spot for use?
Are you using NVidia Video drivers or are you using the WDDM drivers?
Have you tried installing with only 2GB or 3GB or RAM... installed?
Is your Raptor set to run as RAID or PATA or SATA ?
What are the jumpers set on the HDD to indicate?
What does the BIOS find your HDD installed as?
Does the Bios agree with the setting for your HDD?

Quote:

by KentucyRanger from NVidia site.
I figured it couldn't be the RAM because after all, Vista 64bit supports up to 8 GIG, right? WRONG! Anything over 2 GIG and Vista has a Cow, untill you download a driver update...
Anyway, I took out all but one Stick of RAM and Vista loaded like a charm.
I went to Microsoft and downloaded the vista driver update and shut the system down. Put the 3GIG back and what do ya know, Vista accepted the RAM and is purring like a Kitten.

Psss: he also has your exact mobo and video card.

felix8406 · 08-19-2007, 07:50 PM

If it installs, I doubt the issue has anything to do with the HD. Also, if it's a clean install, it's using Vista's default drivers. You can run a diagnostic check of yous RAM using the Vista DVD. However, the most likely culprit would be a driver issue and your first bet would be a BIOS update.

Snuffy · 08-20-2007, 12:49 PM

I would like to see him remove 1 stick or memory and work with 3GB, if his manual says it will work correcly, if not then remove 2 sticks, and try with 2GB...

freakydog · 08-20-2007, 10:49 PM

ok well i did do the bios and that did not work. Now i am going to try removing some of the memory. I will keep you guys updated.

08-19-2007, 02:47 PM	#1
freakydog Junior Member Join Date: Aug 2007 Posts: 4	Problem installing vista ultimate 64 ive been trying to install Windows Vista ultimate 64 bit on my new machine and everytime it goes to restart after the first steps it says windows will not start. CPU - Intel core2quad Q6600 Motherboard - nvidia nForce 680i sli HDD - raptor 150 gb video card - bfg nvidia geforce 8800 gts oc 320 mb Memory - 4 gb of OCZ dual ch reaper edition any help would be nice
(Offline)

08-19-2007, 03:09 PM	#2
crabby Super Moderator Join Date: Jun 2006 Location: Salisbury, UK Posts: 2,355	So it copies all the files... then on reboot just says 'windows wont start'? Usually the errors have more information. Have you tried installing it with just one stick of RAM installed? You can add the other sticks one at a time (with reboots in between) once you get into vista for the first time. crabby
(Offline)

08-19-2007, 03:45 PM	#3
freakydog Junior Member Join Date: Aug 2007 Posts: 4	ok it is now freezing after it restarts and
(Offline)

08-19-2007, 04:18 PM	#4
crabby Super Moderator Join Date: Jun 2006 Location: Salisbury, UK Posts: 2,355	And what? All your hardware is new.. what manufacturer created your motherboard? Have you checked there are no compatability issues? Have you got anything overclocked? Have you tried underclocking anything? crabby
(Offline)

08-19-2007, 04:29 PM	#5
freakydog Junior Member Join Date: Aug 2007 Posts: 4	its a evga 680i mainboard. nothing over or underclocked. it went through the beginning of vista installation and on first reboot it goes to the black screen with the green bar and freezes after a few seconds. I havent tried reducing memory to 1 gig yet though....
(Offline)

08-19-2007, 07:50 PM	#7
felix8406 ABXpert Join Date: Aug 2006 Location: San Antonio, TX Posts: 3,628	If it installs, I doubt the issue has anything to do with the HD. Also, if it's a clean install, it's using Vista's default drivers. You can run a diagnostic check of yous RAM using the Vista DVD. However, the most likely culprit would be a driver issue and your first bet would be a BIOS update.
(Offline)

08-20-2007, 12:49 PM	#8
Snuffy Elite Members Join Date: Nov 2006 Location: S.W. Kansas Posts: 2,841	I would like to see him remove 1 stick or memory and work with 3GB, if his manual says it will work correcly, if not then remove 2 sticks, and try with 2GB... __________________ [COLOR="DarkRed"]The only Stupid Question is the one you failed to Ask![/color] [COLOR="Blue"]Beta Tester since Pre Win 95.[/COLOR]
(Offline)

08-20-2007, 10:49 PM	#9
freakydog Junior Member Join Date: Aug 2007 Posts: 4	ok well i did do the bios and that did not work. Now i am going to try removing some of the memory. I will keep you guys updated.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode