Official Guild Wars Thread - Page 5

zsaz1029 · 05-14-2005, 08:53 PM

Okay, now what do I do with the Tapestry Shred?

Wingit · 05-14-2005, 10:01 PM

Quote:

Originally Posted by zsaz1029

Okay, now what do I do with the Tapestry Shred?

Dunno, may be there's a use for it that I didn't find...I'm post-searing and getting pretty high level and still carry the thing around...I'm gonna toss it before too much longer, although I keep thinking I'm going to need it for something...oh, well....

Jorrell · 05-15-2005, 12:37 AM

What's the deal with only being able to have 2 people in a group? Do you need to be higher level to have more?

Wingit · 05-15-2005, 12:43 AM

Quote:

Originally Posted by Jorrell

What's the deal with only being able to have 2 people in a group? Do you need to be higher level to have more?

I don't remember it being as few as two...are you still in pre-searing Ascalon?
I can group with 4 or sometimes 6 so far (depending on location) in post-searing game world (PvE). Or are you referring to PvP contests?

Jorrell · 05-15-2005, 01:04 AM

pre-searing PvE maybe I need to be in post-searing

teng029 · 05-15-2005, 10:15 AM

which location allows six in a group? so far i've only been able to have four.

Wingit · 05-15-2005, 10:21 AM

Quote:

Originally Posted by teng029

which location allows six in a group? so far i've only been able to have four.

Various locations in Kryta for sure...possibly some in the mountains (I'll check later), I think number of slots available increases with difficulty of quests/missions...

Arutha_abx · 05-15-2005, 10:54 AM

Quote:

Originally Posted by teng029

which location allows six in a group? so far i've only been able to have four.

I think Yaks End and Borliss Pass are the first two points that your party goes from 4 to 6. Once again I did not get by the Borliss Pass last night I didn't even make it as far as I did the first time! I did go on my own and make it to Serenity temple so I have some more of the map opened up. One of these days those I'll make it down into Kryta!

teng029 · 05-15-2005, 01:47 PM

Quote:

Originally Posted by Arutha

I think Yaks End and Borliss Pass are the first two points that your party goes from 4 to 6. Once again I did not get by the Borliss Pass last night I didn't even make it as far as I did the first time! I did go on my own and make it to Serenity temple so I have some more of the map opened up. One of these days those I'll make it down into Kryta!

ah, ok thanks. i was actually on my way to yak's bend when the game conveniently crashed on me.

Arutha_abx · 05-15-2005, 05:45 PM

Hmmm never had the game crash on me like that Teng029 that seems kind of strange.

I did make it pass Borliss pass and am now at Frost Gate. So I am trying to catch up with you Wingit. For Borliss Pass I had a party of 3 warriors and 2 monks. Talk about slaughtering everything in your path! =)

count minaba · 05-15-2005, 08:55 PM

Got the game and yes it looks sweeeeeet!
I'm looking forward to playing

teng029 · 05-16-2005, 10:37 AM

Quote:

Originally Posted by Arutha

Hmmm never had the game crash on me like that Teng029 that seems kind of strange.

I did make it pass Borliss pass and am now at Frost Gate. So I am trying to catch up with you Wingit. For Borliss Pass I had a party of 3 warriors and 2 monks. Talk about slaughtering everything in your path! =)

actually it crashed on me twice yesterday while trying to get to yak's bend. the second time around, i was heading back to the zone gate to the lowlands. i stopped playing after that happened so i've still yet to get to yak's bend.

Arutha_abx · 05-16-2005, 11:03 AM

Quote:

Originally Posted by teng029

actually it crashed on me twice yesterday while trying to get to yak's bend. the second time around, i was heading back to the zone gate to the lowlands. i stopped playing after that happened so i've still yet to get to yak's bend.

That is pretty strange did you send an email to them or ask in their support forum to see if others are having that problem. Does it say anything when it crashes? I never had it crash on me like that and am wondering why it does it for you. Are you trying to get to Yaks End on your own, or are you doing the primary quest to get there? I know if you do Nolani Acdemy and finish that primary mission then you will get to Yaks End after you finish that mission. So try doing that instead of trying to march their on your own.

teng029 · 05-16-2005, 12:23 PM

no, it wasn't for a quest. i was just farming and exploring the area. it does give me an error code when it crashes, although i don't remember what it is off the top of my head.

i've been using henchmen exclusively, so i don't know if that has anything to do with it.

Arutha_abx · 05-16-2005, 01:30 PM

Quote:

Originally Posted by teng029

no, it wasn't for a quest. i was just farming and exploring the area. it does give me an error code when it crashes, although i don't remember what it is off the top of my head.

i've been using henchmen exclusively, so i don't know if that has anything to do with it.

I usually use the henchmen when I am off exploring and haven't had a problem with that game. That stinks it keeps crashing on you though. I guess your other option would be try to skip Yaks end and head to Borliss Pass. You can pick up more henchmen there and the Expert Salvage Kit.

05-14-2005, 08:53 PM	#61
zsaz1029 Registered User Join Date: Mar 2003 Posts: 1,938	Okay, now what do I do with the Tapestry Shred? __________________ Spaz ----- Check out my boy ASH on myspace! Help my town grow and prosper: Spaztowne
(Offline)

05-15-2005, 12:37 AM	#63
Jorrell baka neko Join Date: Nov 2003 Posts: 714	What's the deal with only being able to have 2 people in a group? Do you need to be higher level to have more? __________________
(Offline)

05-15-2005, 01:04 AM	#65
Jorrell baka neko Join Date: Nov 2003 Posts: 714	pre-searing PvE maybe I need to be in post-searing
(Offline)

05-15-2005, 10:15 AM	#66
teng029 Registered User Join Date: Oct 2002 Posts: 455	which location allows six in a group? so far i've only been able to have four. __________________ my rig: Gaming: Intel Core2 Duo E6400 Asus P5N SLI Nforce 570 2X EVGA GE Force 7900GTO SLI 2X 1GB PQI DDR2 667mhz Creative Labs Soundblaster Audigy 2 ZS Seagate SATA 400GB HDD Lite-On 16x DVD-RW Antec NEO HE 550 Klipsch Promedia 5.1
(Offline)

05-15-2005, 05:45 PM	#70
Arutha_abx There is no fear... Join Date: Mar 2004 Location: Oregon Posts: 2,027	Hmmm never had the game crash on me like that Teng029 that seems kind of strange. I did make it pass Borliss pass and am now at Frost Gate. So I am trying to catch up with you Wingit. For Borliss Pass I had a party of 3 warriors and 2 monks. Talk about slaughtering everything in your path! =) __________________ P4C800-E-Deluxe, P4 3.2, 2x512 Mushkin PC3500 Level one(2-3-2-6 timings@200FSB), VisionTek XTASY Radeon X850XT PE,Audigy2 ZS,Aspire Turbo 500W, Aspire X-SuperAlien(blue), 16XDVD(Lite On), 8X NEC2500A ±RW DVD Burner, Dell 20.1" 2005FPW LCD "He who can Destroy a thing, controls a thing" Paul Muad'Dib 3DMark03 Score= 12779
(Offline)

05-15-2005, 08:55 PM	#71
count minaba LivingDead... LivingLarge Join Date: Nov 2002 Location: Dead center of Sydney! Posts: 11,271	Got the game and yes it looks sweeeeeet! I'm looking forward to playing __________________ IC7-MAX3/ bios 1.8 Intel 3.4E 1gig OCZ PC4200EL Invidai 6600GTS 2xSeagate 120gig Sata Raid0 WinXP Pro SP2 MCE2005 22" Viewsonic widescreen Pioneer 111 DVD Liteon 52x CDRW Logitech Z640 5.1
(Offline)

05-16-2005, 12:23 PM	#74
teng029 Registered User Join Date: Oct 2002 Posts: 455	no, it wasn't for a quest. i was just farming and exploring the area. it does give me an error code when it crashes, although i don't remember what it is off the top of my head. i've been using henchmen exclusively, so i don't know if that has anything to do with it. __________________ my rig: Gaming: Intel Core2 Duo E6400 Asus P5N SLI Nforce 570 2X EVGA GE Force 7900GTO SLI 2X 1GB PQI DDR2 667mhz Creative Labs Soundblaster Audigy 2 ZS Seagate SATA 400GB HDD Lite-On 16x DVD-RW Antec NEO HE 550 Klipsch Promedia 5.1
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode