"P4C800-E Deluxe" OC'ing tips etc. - Page 2

kbk_75 · 11-21-2003, 08:25 AM

Well I've run my vCore all the way to 2.85V max setting, and it barely manages to stay stable at 283 FSB 5:4, so for now, it will have to remain 3:2.

I'l try some BIOS tweaking when I get the time, I'm in another city right now on my trusy ol' 1.8A which chugs along at 2.5 and OCZ PC 1200 RDRAM! Funny thing is, I could never get that RAM to run 150MHz because the blessed P4T533 has no vDimm settings!

So even though I know this CPU can hit almost 2700, it remains stuck around 2500 with 4x RAM multiplier.

Sharkims · 11-24-2003, 04:37 AM

I'm going to bump this as it was very usfull to me.

My question is however:
What is the MPS Revision? (1.1/1.4)

mr. Charles · 11-24-2003, 07:38 AM

......DanX.......at the beginning of your thread, you show your Bios setting's of a setup, in particular>>>

ICH Delayed Trans. : Disabled
( Delayed transaction mode for the PCI bus, Read:http://www.rojakpot.com/default.asp...1=0&var2=77 for more info )

..............in going to the web sight and reading on, it states that you should "Enable" this setting. .....could you clarify Why you are stating that we should " DISable " this mode????

DanX · 11-24-2003, 08:49 AM

Good question mr. Charles !

As I stated the settings represent my setup.
And my setup includes a certain (quite old) Echo Audio PCI soundcard that works much better with this option disabled.

In your case you should leave it "Enabled" just as stated.
Thats why I made the link to rojak.. so you could decide for yourself

And of course If there is anything more to this option that I'm not aware of plz tell me.

Also, you can take a look here... :
http://www.abxzone.com/forums/showthread/t-58025.html

Sierra_abx · 11-24-2003, 09:17 AM

Quote:

Originally posted by Sharkims

My question is however:
What is the MPS Revision? (1.1/1.4)

MPS stands for Multiprocessor Specification. It's a standard that PC makers use to build systems with two or more processors.

http://www.adriansrojakpot.com/Speed..._Guide_01d.htm

BBThumper · 11-24-2003, 01:05 PM

........most find MPS=1.4 to be best..........Be careful when change the Idle timer and Refreshrate, I had them tooo tight once and ended up formatting because of corrupted data

.................

DRAM Refresh Rate : 64µsec
( 90%sure this is the optimal setting, still investigating )

.........lower is safer - 7.8u is recommended for 512mg of ram........

............I have never seen any instability by running ICH=Enabled but my scores do increase with it. I never got an answer for this but this option being named ICH Delay would suggest to me its for the ICH channel and not for PCI cards......Any thoughts?.....

.....thks for the thread DanX

......................

DanX · 11-24-2003, 03:14 PM

Once again, my settings are optimal for my computer. And I do have 1GB of Ram

.

But of course ! if you you want to be safe keep the Ram Refresh rate a bit lower.

The ICH option explanaition is so similar to the PCI ( delayed tra.. ) that I didn't bother to explain it further but here it is :

The chipset (ICH) has an integrated 32bit writebuffer to give access to the PCI bus. When this option is enabled, the PCI bus works according the PCI 2.1 specifications.

There you go !

BBThumper · 11-24-2003, 03:15 PM

.....thks again Dan........

mr. Charles · 11-24-2003, 05:15 PM

Quote:

Originally posted by DanX
Good question mr. Charles !

As I stated the settings represent my setup.
And my setup includes a certain (quite old) Echo Audio PCI soundcard that works much better with this option disabled.

In your case you should leave it "Enabled" just as stated.
Thats why I made the link to rojak.. so you could decide for yourself

And of course If there is anything more to this option that I'm not aware of plz tell me.

Also, you can take a look here... :
http://www.abxzone.com/forums/showthread/t-58025.html

..........most definitely thankful for your reply back and your clarification of...........much appreciate people like you DanX and other's as well, and this forum, for people like me to learn more and more from all of help and feedback's...............again thx.........

..........keep up the great work.........

DanX · 11-25-2003, 04:52 AM

NP guys !

I't just fun to see that this thread has proven useful to at least a few people out there

st0nedpenguin_abx · 11-25-2003, 12:45 PM

Damn handy guide sir.

I just got my 2.4c and P4C800-E Deluxe a day or so ago and I'm sure this guide will come in handy when I crank up the FSB, it's running at 3.3GHz at the moment, 3:2, 2-2-2-6, so I have plenty of room to play, not too shabby for stock voltage.

This is my first post here, so I though this would be a great place to start.

BBThumper · 11-25-2003, 12:46 PM

........Welcome Stone

.........

st0nedpenguin_abx · 11-25-2003, 01:16 PM

Thanks BB, nice to see a familiar face

I dunno, ABIT forums, XS, and now here, maybe it's fate, will you marry me?

Sierra_abx · 11-25-2003, 01:22 PM

Thanks again for starting this thread. I think it's a great help to all of us. Asus does such a poor job of explaining the BIOS settings in its manual. We, the users, have been left to pretty much fend for ourselves. I hereby nominate this thread for possible sticky status.

st0nedpenguin_abx · 11-25-2003, 01:37 PM

I'll second that!

Don't you just love it when the explanation for, say, Spread Spectrum says something along the lines of "Enables or disables Spread Spectrum", well thanks for that nugget of info there, sheesh...

11-21-2003, 08:25 AM	#16
kbk_75 F1 Fanatic! Join Date: Oct 2003 Location: Mumbai, India Posts: 653	Well I've run my vCore all the way to 2.85V max setting, and it barely manages to stay stable at 283 FSB 5:4, so for now, it will have to remain 3:2. I'l try some BIOS tweaking when I get the time, I'm in another city right now on my trusy ol' 1.8A which chugs along at 2.5 and OCZ PC 1200 RDRAM! Funny thing is, I could never get that RAM to run 150MHz because the blessed P4T533 has no vDimm settings! So even though I know this CPU can hit almost 2700, it remains stuck around 2500 with 4x RAM multiplier. __________________ Current Rig: 2.4GHz E6600 Core2 Duo @ 3.5GHz \| Thermalright Ultra 120 Extreme + 120mm Scythe \| Asus Striker Extreme \| 2x2GB Mushkin DDR2-800 \| 2xPNY Factory OC'd Geforce 8800GTX SLI 621 Core, 2000 Mem \| 4xSamsung Spinrite 500GB SATA RAID 0+1 \| 18X Asus Lightscribe DVD DL Burner \| 18X Sony DVD DL Burner \| Sound Blaster Fatal1ty Extreme Gamer \| 24" Dell 2407WFP-HC \| Logitech Cordless Keyboard + MX Revolution Mouse \| Logitech Quickcam Orbit \| Coolermaster CM Stacker 830 + 1200W Thermaltake Toughpower PSU \| 4xScythe 120mm + 2 Coolermaster 120mm LED case fans \| Vista Ultimate 64bit Other Rig: 2.4C SL6Z3 M0 P4 @ 3.2 \| Thermalright SLK-900U + 92mm Vantec Tornado \| Asus P4C800-E Deluxe BIOS 1023 \| 2x512MB OCZ PC4200 EL 3-4-4-8-4 1:1 \| 512MB Gainward 7800GS+ @ 600/1460 \| 2xWD 73GB Raptor ICH5R SATA RAID 0 \| 1xSeagate 7200.7 160GB onboard Promise SATA RAID \| 1xHitachi 7K500 500GB onboard Promise SATA RAID \| 16X Asus DVD-ROM \| 8X Plextor 708A DVD/RW \| Sound Blaster Audigy 2 \| 20.1" Viewsonic VP-201b \| Logitech MX 3000 Keyboard + Mouse \| Logitech Quickcam Orbit \| Thermaltake Xaser III V2000A + 850W Coolermaster PSU
(Offline)

11-24-2003, 04:37 AM	#17
Sharkims I won't bite, honest! Join Date: Nov 2003 Location: USA, WA Posts: 1,318	I'm going to bump this as it was very usfull to me. My question is however: What is the MPS Revision? (1.1/1.4) __________________ Primary Rig: ASUS A8N-SLI Premium \|\| X2 3800+(280x9.5 @ 1.425v (2.7ghz)) - CNPS9500 LED \|\| 2x1gb OCZ PC3200@440(2.5-3-3-10) \|\| 2x eVGA-7800GT SLI \|\| WD Raptors 2x36 RAID0 \|\| Creative X-FI Xtreme Music
(Offline)

11-24-2003, 07:38 AM	#18
mr. Charles Lost > but still at it Join Date: Aug 2003 Location: P.N.W. Posts: 1,400	about a setting your show in your Bios-set's..... ......DanX.......at the beginning of your thread, you show your Bios setting's of a setup, in particular>>> ICH Delayed Trans. : Disabled ( Delayed transaction mode for the PCI bus, Read:http://www.rojakpot.com/default.asp...1=0&var2=77 for more info ) ..............in going to the web sight and reading on, it states that you should "Enable" this setting. .....could you clarify Why you are stating that we should " DISable " this mode???? __________________ .....Gaming_rigg#1 ..... _AMD Opty 170{CCBWE 0530 TPMW}dual core@2.8MSI K8N DIAMOND PLUS* nVidia nForce4 mthrbrd * 2GB G.Skill {HZ} * 2(ea)=Nvidia Geforce 7800 GTX 512MB=>>SLI<< * HHD's = WD 74GB Raptor & Maxtor 250GB/16mb/7200 rpm * PSU=OCZ-600w_Adj SLi PwrStreamSB X-Fi XtremeMusicSwiftech H2O "Xtreme Duty"_cooling(w/*Storm_wb* )* . ..."Gaming"_rigg#2... AMDFX-55 MSI K8N Neo2 Plat. nVidia nForce3 mthrbrd2GB Mushkin's XP4000ATi (R) X800* XT Plat.Ed.(cat's 5.20)* OCZ-520w_Adj PwrStream PSU*H2O-cooling = CPUAC_Silencer4-cooling = GPUAudigy2 ZS_Gamer* >>>Ground Poundin<<< Logitech's Z680 spkr.systm. * Logitech G15 Gaming Keyboard & Logitech MX518 Gaming Mouse * Samsung 940b LCD * yeah >>> yeah ..... i-No * . _ the "other" rigg: P4 2.4C@3.4 {SL6Z3}Asus P4C800-E Dlx_rev2.0 {Bios=1016}OCZ PC4000(2x512) dl ch GOLD's* H2O-cooled = Koolance/EXOS-AL { rad, CPU, GPU, res/pump }NB = Swiftech's MCX159-P ATi (R) X800 Pro {cat's 5.20}Aerogate-2 {mntr-temp's/fan rpm's}Enermax-550w psu* 2(ea)=Maxtor hhd's 160gb w/8mb buffer_7200Lian-Li PC60usb (mid_Alum.cs) Audigy 2 ZSViewSonic PF790 (19" mntr.) ..... ..... .
(Offline)

11-24-2003, 08:49 AM	#19
DanX Registered User Join Date: Nov 2003 Location: Sweden Posts: 131	Good question mr. Charles ! As I stated the settings represent my setup. And my setup includes a certain (quite old) Echo Audio PCI soundcard that works much better with this option disabled. In your case you should leave it "Enabled" just as stated. Thats why I made the link to rojak.. so you could decide for yourself And of course If there is anything more to this option that I'm not aware of plz tell me. Also, you can take a look here... : http://www.abxzone.com/forums/showthread/t-58025.html __________________ Asus P4C800-E Deluxe P4 2.6C@3.3GHz 2x A-DATA 512Mb PC4000 FSB 1020MHz 1:1 ATI Radeon X800PRO @ X800XT PE Last edited by DanX : 11-24-2003 at 08:56 AM.
(Offline)

11-24-2003, 01:05 PM	#21
BBThumper Happy, Joyous and Free Join Date: Jun 2003 Location: Philly Posts: 2,024	........most find MPS=1.4 to be best..........Be careful when change the Idle timer and Refreshrate, I had them tooo tight once and ended up formatting because of corrupted data ................. DRAM Refresh Rate : 64µsec ( 90%sure this is the optimal setting, still investigating ) .........lower is safer - 7.8u is recommended for 512mg of ram........ ............I have never seen any instability by running ICH=Enabled but my scores do increase with it. I never got an answer for this but this option being named ICH Delay would suggest to me its for the ICH channel and not for PCI cards......Any thoughts?..... .....thks for the thread DanX ...................... __________________ ASUS M3A32-MVP Deluxe AMD Phenom 9600 XP-90c w/ a T.T. 92mm fan 2 x 2gig pc26400 Nvidia 8400 2 x Raptors in Raid 0 ......My City's moto: Welcome to Philly, now get the heck out!!!!!!! Last edited by BBThumper : 11-24-2003 at 01:12 PM.
(Offline)

11-24-2003, 03:14 PM	#22
DanX Registered User Join Date: Nov 2003 Location: Sweden Posts: 131	Once again, my settings are optimal for my computer. And I do have 1GB of Ram . But of course ! if you you want to be safe keep the Ram Refresh rate a bit lower. The ICH option explanaition is so similar to the PCI ( delayed tra.. ) that I didn't bother to explain it further but here it is : The chipset (ICH) has an integrated 32bit writebuffer to give access to the PCI bus. When this option is enabled, the PCI bus works according the PCI 2.1 specifications. There you go ! __________________ Asus P4C800-E Deluxe P4 2.6C@3.3GHz 2x A-DATA 512Mb PC4000 FSB 1020MHz 1:1 ATI Radeon X800PRO @ X800XT PE
(Offline)

11-24-2003, 03:15 PM	#23
BBThumper Happy, Joyous and Free Join Date: Jun 2003 Location: Philly Posts: 2,024	.....thks again Dan........ __________________ ASUS M3A32-MVP Deluxe AMD Phenom 9600 XP-90c w/ a T.T. 92mm fan 2 x 2gig pc26400 Nvidia 8400 2 x Raptors in Raid 0 ......My City's moto: Welcome to Philly, now get the heck out!!!!!!!
(Offline)

11-25-2003, 04:52 AM	#25
DanX Registered User Join Date: Nov 2003 Location: Sweden Posts: 131	NP guys ! I't just fun to see that this thread has proven useful to at least a few people out there __________________ Asus P4C800-E Deluxe P4 2.6C@3.3GHz 2x A-DATA 512Mb PC4000 FSB 1020MHz 1:1 ATI Radeon X800PRO @ X800XT PE Last edited by DanX : 11-25-2003 at 06:08 AM.
(Offline)

11-25-2003, 12:45 PM	#26
st0nedpenguin_abx Registered User Join Date: Nov 2003 Location: Britland Posts: 108	Damn handy guide sir. I just got my 2.4c and P4C800-E Deluxe a day or so ago and I'm sure this guide will come in handy when I crank up the FSB, it's running at 3.3GHz at the moment, 3:2, 2-2-2-6, so I have plenty of room to play, not too shabby for stock voltage. This is my first post here, so I though this would be a great place to start. __________________ ASUS P4C800-E Deluxe \|\| 2.4C @ ? \|\| 1Gb OCZ EL DDR PC-3500 Dual Channel Platinum Limited Edition \|\| Radeon 9800 Pro \|\| Audigy 2 \|\| Inspire 6700 \|\| 60Gb IBM \|\| 20Gb Maxtor \|\| Chieftec Blue Dragon \|\| Enermax EG651P-VE FMA 550w \|\| Vantec Nexus \|\| Thermalright SP-94 \|\| Vantec Tornado \|\| 4 x Panaflo 80mm
(Offline)

11-25-2003, 12:46 PM	#27
BBThumper Happy, Joyous and Free Join Date: Jun 2003 Location: Philly Posts: 2,024	........Welcome Stone ......... __________________ ASUS M3A32-MVP Deluxe AMD Phenom 9600 XP-90c w/ a T.T. 92mm fan 2 x 2gig pc26400 Nvidia 8400 2 x Raptors in Raid 0 ......My City's moto: Welcome to Philly, now get the heck out!!!!!!!
(Offline)

11-25-2003, 01:16 PM	#28
st0nedpenguin_abx Registered User Join Date: Nov 2003 Location: Britland Posts: 108	Thanks BB, nice to see a familiar face I dunno, ABIT forums, XS, and now here, maybe it's fate, will you marry me? __________________ ASUS P4C800-E Deluxe \|\| 2.4C @ ? \|\| 1Gb OCZ EL DDR PC-3500 Dual Channel Platinum Limited Edition \|\| Radeon 9800 Pro \|\| Audigy 2 \|\| Inspire 6700 \|\| 60Gb IBM \|\| 20Gb Maxtor \|\| Chieftec Blue Dragon \|\| Enermax EG651P-VE FMA 550w \|\| Vantec Nexus \|\| Thermalright SP-94 \|\| Vantec Tornado \|\| 4 x Panaflo 80mm
(Offline)

11-25-2003, 01:22 PM	#29
Sierra_abx Registered User Join Date: Sep 2003 Posts: 13,880	DanX Thanks again for starting this thread. I think it's a great help to all of us. Asus does such a poor job of explaining the BIOS settings in its manual. We, the users, have been left to pretty much fend for ourselves. I hereby nominate this thread for possible sticky status.
(Offline)

11-25-2003, 01:37 PM	#30
st0nedpenguin_abx Registered User Join Date: Nov 2003 Location: Britland Posts: 108	I'll second that! Don't you just love it when the explanation for, say, Spread Spectrum says something along the lines of "Enables or disables Spread Spectrum", well thanks for that nugget of info there, sheesh... __________________ ASUS P4C800-E Deluxe \|\| 2.4C @ ? \|\| 1Gb OCZ EL DDR PC-3500 Dual Channel Platinum Limited Edition \|\| Radeon 9800 Pro \|\| Audigy 2 \|\| Inspire 6700 \|\| 60Gb IBM \|\| 20Gb Maxtor \|\| Chieftec Blue Dragon \|\| Enermax EG651P-VE FMA 550w \|\| Vantec Nexus \|\| Thermalright SP-94 \|\| Vantec Tornado \|\| 4 x Panaflo 80mm
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode