Tusl2-C + Tualatin = 1404Mhz! - Page 9

Infamous_Q · 03-12-2003, 09:18 PM

MSI 694T Pro
1.2 Tau to 1.45 stable
FSB100 / 120
Volts 1.475 / 1.525
nVidia Ti 4200 AGP
Let me know what I can do to get better performance, if this isn't good enough, using an golden orb to cool the cpu with artic silver

AGR964 · 03-12-2003, 09:36 PM

The stock Intel Cooler actually does a better job of cooling than a golden orb.

You can try to increase the Vcore a little more and see what happens.

I don't know about the MSI 694T Pro, but with a TUSL2, if your system does not post at higher frequencies, you may have to do the wire trick to get it to post.

JAN THE LAST · 04-22-2003, 07:53 PM

Quote:

Originally posted by CATCH22ATPLAY
Yes read the vid pin trick thread. It explains all and if you need to go above 1.825 i also explain how to mod a chip on the mobo to increase Vcore to whatever you want. That should answer all your questions.

Hi!

Could You also indicate me this thread, please?
I've an Abit St6, but the pin-out on the mobo is equal for every mb, so I could use the vid pin trick also onto my mobo.

Many thx in advance

Greetings.

!phreak! · 09-17-2004, 03:19 AM

Can anybody tell me how to overclock an HP Pavilion 520W @ 1.2 Ghz w/ a celeron processor? I Have looked and looked and can't find anything about it. Will send other PC specs if needed. If you can help i would really appreciate it. You can e-mail me at limpasa3dollarbill@yahoo.com. Thanx

Papcina · 12-09-2004, 05:23 PM

Quote:

Originally Posted by JAN THE LAST

Hi!

Could You also indicate me this thread, please?
I've an Abit St6, but the pin-out on the mobo is equal for every mb, so I could use the vid pin trick also onto my mobo.

Many thx in advance

Greetings.

Hello there guys!
Well, I've been reading this articles.. I have TUSL2-C and a Celeron Tualatin 1300MHz (tA1 version) and I got it running on 1703MHz... that's quite... but does anyone know how to do better? I am using a modified BIOS from www.x-86secrets.com (or somethin like that), and it is good... I will try to find PC150 RAM because this one is not good... can anyone help me with the voltage mod on my mobo? I really wan't to do this, has anyone any link which could help me... ? Please?
Anyway, about the cooling, I am using Spire Falcon ROck 2, at full load it is on 53C, at normal it is 45-46C....
that's all for now.

regards from Croatia!

ob1 · 12-13-2004, 02:09 AM

Drysytone 4725
Whetstone 1882
Integer 12267
Floating-Point 14467
Tualatin Celery 1.10G = 1,386 Mhz (@ 126 mhz)
Slot 1 adaptor in a Asus P3V4X,
tB1 stepping
1.6 V core
Using a HSF from a Athalon XP 2500
Rock stable, for over 1 year.
Can't kill this thing.

Daneel Olivaw · 12-14-2004, 11:44 PM

Check sig, Tualatin Celery 1.3@1.612... Good stuff
I got to 1733 with a voltmod, but temps freaked me out and had unstabilities.

tormento_abx · 03-25-2005, 05:12 AM

Quote:

Originally Posted by jmsandrsn

Zbone,
All you have to do to get a default voltage of 1.675 is wrap VID1 and VID2. If you need the Intel spec sheet on the desktop Tualatins let me know...I can either give you a link or e-mail it to you. I had to go up to about 1.65V to get stability at 167 FSB(1.5 GHZ) on my ST6.

I just bought an old Abit ST6 and a Celeron 1200.

Can you send me a link or a photo explaining which pins are to be connected by the wire trick?

Even a hacked bios would be useful!

Addemomaageft · 01-26-2008, 03:31 AM

Hi,
Please, tell me
information,that is most popular about anything,but only legal and not adult.
Thanks for the info.

Drufuss · 01-26-2008, 05:29 AM

Too bad, one of my favorite threads was resurrected by a spammer.

03-12-2003, 09:18 PM	#121
Infamous_Q Registered User Join Date: Mar 2003 Posts: 1	MSI 694T Pro 1.2 Tau to 1.45 stable FSB100 / 120 Volts 1.475 / 1.525 nVidia Ti 4200 AGP Let me know what I can do to get better performance, if this isn't good enough, using an golden orb to cool the cpu with artic silver __________________ Infamous Q
(Offline)

03-12-2003, 09:36 PM	#122
AGR964 SeÃ±orMushyBottom Join Date: Sep 2001 Location: Sunny California Posts: 2,129	The stock Intel Cooler actually does a better job of cooling than a golden orb. You can try to increase the Vcore a little more and see what happens. I don't know about the MSI 694T Pro, but with a TUSL2, if your system does not post at higher frequencies, you may have to do the wire trick to get it to post. __________________ MSI K8N Neo2 Platinum; 939 A64 Winchester 2.3 GHz; Sapphire Radeon 9800 Pro; 74GB Raptor; Dual Channel Mushkin 1024MB 2-2-2-10 fjerbvpodjytgdkrfg
(Offline)

09-17-2004, 03:19 AM	#124
!phreak! Registered User Join Date: Sep 2004 Location: West Virginia Posts: 1	Can anybody tell me how to overclock an HP Pavilion 520W @ 1.2 Ghz w/ a celeron processor? I Have looked and looked and can't find anything about it. Will send other PC specs if needed. If you can help i would really appreciate it. You can e-mail me at limpasa3dollarbill@yahoo.com. Thanx
(Offline)

12-13-2004, 02:09 AM	#126
ob1 Registered User Join Date: Jul 2003 Location: New York Posts: 67	Drysytone 4725 Whetstone 1882 Integer 12267 Floating-Point 14467 Tualatin Celery 1.10G = 1,386 Mhz (@ 126 mhz) Slot 1 adaptor in a Asus P3V4X, tB1 stepping 1.6 V core Using a HSF from a Athalon XP 2500 Rock stable, for over 1 year. Can't kill this thing. __________________ P4P800 D P4/3.2C-SL6WG OCZ 3200 EL (1GB) Zalman 7000 A Thermalright NB-1 9800 Omega Softmod (2) Seagate 7200.7 (SATA) M Audio FireWire Audiophile Teac CDW540E /Pioneer DVD-117 Enermax 465 Lian Li PC-60 ------------------------------------ NF7-S-v2.0 2600M-IQYHA Thermalright SI-97 GSkill F1-3200DUS2-512LC 9600 Pro- Omega 2.5.5.1 2-Hitachi 7K250 (Raid 0) Antec 550 True Control NEC ND-3500 Lian Li PC-61
(Offline)

12-14-2004, 11:44 PM	#127
Daneel Olivaw Registered User Join Date: Sep 2004 Location: Montreal, Qc Posts: 65	Check sig, Tualatin Celery 1.3@1.612... Good stuff I got to 1733 with a voltmod, but temps freaked me out and had unstabilities. __________________ Intel Pentium 4C CPU 2.40GHz (BX80532PG2400D) @3.40GHz OCZ EL DDR PC-3200 Dual Channel Platinum Rev 2 (OCZ24001024DCPER2-K) @454MHz 2-3-3-5 Asus P4P800 Deluxe (P4P800 DELUXE) @1133MHz MSI GeForce FX5900XT-VTD128 (MS-8937-040) @465MHz 774MHz Arctic Cooling NV Silencer 3 (AVC-NV3) Antec Solution Series Super Mini Tower (SLK2600AMB) @Thermally Advantaged Chassis Antec Truepower 430W (TRUE430)
(Offline)

01-26-2008, 03:31 AM	#129
Addemomaageft Registered User Join Date: Jan 2008 Posts: 1	Where can I find popular sites? Hi, Please, tell me information,that is most popular about anything,but only legal and not adult. Thanks for the info.
(Offline)

01-26-2008, 05:29 AM	#130
Drufuss CUSL2-C -> P5Q ? Join Date: Feb 2002 Location: Österreich Posts: 2,763	Re: Tusl2-C + Tualatin = 1404Mhz! Too bad, one of my favorite threads was resurrected by a spammer. __________________ System specs: Asus P5Q Core 2 Quad Q9550 2.83 GHz @ 3.42 GHz 4 x 2GB DDR2-Ram PC2-1066 Corsair Dominator @ 800MHz 3 x Seagate 7200.ESII 500GB SATA Sapphire HD4870X2 2048MB Soundblaster Audigy 2 ZS, Hauppauge HVR4000 DVB-S/S2/T, Dlink DWL-G510, Logitech Z-5450 5.1 THX Wireless Enermax Modu82+ 625W Win XP MCE 2005, openSuse Linux 11 64bit, Vista Home Premium 64bit CUSL2-C ruled! ..äh... RulEd! Time flies like an arrow, fruit flies like a banana.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode