Hey, post your 3Dmark2001 results here! - Page 14

**Perry_abx** · 10-16-2001, 12:53 AM

8500! :eek: :eek: :eek:

hehe...

Weird thing I noticed is that in the Sandra mem my integer is lower than yours but the floating point score is higher.

Sounds like that TUSL2-C and Tualatin 1.2 are performing well bud. Have you noticed any problems over 140FSB with the mem or AGP 4X?

bajo · 10-16-2001, 10:28 PM

...works like a charm bud

Just saw 8500 @ CompUSA today..$ 299:eek:

Rafael · 10-17-2001, 06:35 PM

Was getting 3727 with the new Radeon 7500 out of the box with P3@1132 ram @ 33379.

After a little legitimate tweaking I get 3734 With the P3@1105/133 ram @ 22257. PURE STOCK SETUP! NO o-clocking of proc. or Radeon.

With P3@1185/158fsb, and no o-clock for the Radeon I get 4015.

Not too bad, I guess, for a hopped up Radeon-64.
Still running the CUSL2 and crappy ram-until- my wallet can feed my craving for a speedy Athlon rig with 333ddr.

$
RAF

bajo · 10-17-2001, 11:26 PM

...stock Tualatin 1.2Gig, TUSL2-C, 2.2.2.5/7, 133fsb, Rev3+

6899

...more than old 3DM2000 with 1GigPIII@1170MHz & ViVo

...new 3DM2k is 8780

**Perry_abx** · 10-17-2001, 11:35 PM

WOW bajo.... that's a monster score! :eek:

Starting to wonder if my GF3 upgrade was a good idea...

Rafael · 10-17-2001, 11:36 PM

4103
Update:

Just picked up another 256mb stick of crappy sdram from my local computer shop. Realizing it was marked "pc133 cas2" I decided to remove my old 256mb stick and run it all alone.
WOW! This $38 ram runs at 153fsb ,"133/133/##" ratio, while still set at 2/2/2/7/9. Not bad for 38 bucks. I'm not going to put my old ram back in.

@ 1155mhz I now score a 4103 on 3dm2k1, the best score for a P3 & Radeon7500-according to madonion's site. It beats alot of higher clocked Athlons, not an easy thing to do.

Dont mean to **** of this sites sponsor, I just got lucky.

$
RAF

bajo · 10-17-2001, 11:46 PM

...you can still return your card & get a real Monster gem

btw - I'm heading to Tom's QIII briefly NOW !! ...wanna get Radeon Fragged?!!:eek:

Rafael · 10-18-2001, 07:11 PM

O.K., got Radeon 8500 envy.
Talked my brother into taking the 7500 off my hands for 1/2 price(I like my brother) and bought an 8500.

*6929*, under 3dmark2001. P3@1132/151, Radeon NOT overclocked and at default 3dmark2k1 settings.

$
RAF

bajo · 10-19-2001, 01:12 AM

:eek:

Rafael · 10-19-2001, 06:24 PM

Thanks Bajo; It was your great score that inspired me.

Actually after some further tweaking and a little more o'clocking i turned in a 7210@3dmk2001 defaults late last night.

I like this card alot. My 7500 had prettier graphics though, must be a driver issue.

$

RAF

bajo · 10-19-2001, 10:58 PM

..did you install the ATI CD drivers - I noticed that they posted 4.13.7189 on the web, but the ones on CD are 4.13.7191

Rafael · 10-20-2001, 07:24 PM

To be honest, since I d/l the 4189 driver the other day, I figured the package HAD to have been packed before the release of the 4189 drivers- so I loaded 4189.

There I go thinking again....

Thanks , will try the CD driver now.

$
RAF

rjtoo · 10-20-2001, 09:15 PM

P3800eb@960.asusv7100 175\166.21.83 dets.2301,good or bad thats my score.in 200O no o\c-5100+

bajo · 10-21-2001, 01:08 AM

...check the freshest from today !

...7199:eek:

Rafael · 10-21-2001, 02:03 AM

Yeah Bajo;

Saw your post about the 7199 drivers right after I posted about the CD drivers.

Its just that I am on a dial up connection and it takes forever.
Am D/Ling them now.

Any comments?

Also, in the 3dmark2k1 lobby tests do you see lost of trash in the image as the guy is running from left to right just before drawing his pistols and finishing off the last bad guy?
And, do you see a 20pixel or so black square in the middle of the horse on the last test?

thanks

$
RAF

10-16-2001, 12:53 AM	#196
Perry_abx Modulator Join Date: Mar 2001 Location: Saint Paul, MN - USA Posts: 5,912	8500! :eek: :eek: :eek: hehe... Weird thing I noticed is that in the Sandra mem my integer is lower than yours but the floating point score is higher. Sounds like that TUSL2-C and Tualatin 1.2 are performing well bud. Have you noticed any problems over 140FSB with the mem or AGP 4X? __________________ Gigabyte GA-P35-DS3L, Intel Core 2 Duo E8400, 2 x 1GB Kingston HyperX DDR2-1066, Palit 9600GT Sonic, Hauppauge WinTV-HVR 1600, 250GB Seagate, 250GB Maxtor, Lite-On XJ-HD166, NEC ND-2510A, Antec SLK3700BQE, Antec SP-500, LG L226WT Widescreen
(Offline)

10-16-2001, 10:28 PM	#197
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,176	None, zip !!!... ...works like a charm bud Just saw 8500 @ CompUSA today..$ 299:eek: __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

10-17-2001, 06:35 PM	#198
Rafael Modest...whack job Join Date: Apr 2001 Location: Va. Beach Va. Posts: 1,443	Was getting 3727 with the new Radeon 7500 out of the box with P3@1132 ram @ 33379. After a little legitimate tweaking I get 3734 With the P3@1105/133 ram @ 22257. PURE STOCK SETUP! NO o-clocking of proc. or Radeon. With P3@1185/158fsb, and no o-clock for the Radeon I get 4015. Not too bad, I guess, for a hopped up Radeon-64. Still running the CUSL2 and crappy ram-until- my wallet can feed my craving for a speedy Athlon rig with 333ddr. $ RAF
(Offline)

10-17-2001, 11:26 PM	#199
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,176	OK - just installed the RadMonster 8500... ...stock Tualatin 1.2Gig, TUSL2-C, 2.2.2.5/7, 133fsb, Rev3+ 6899 ...more than old 3DM2000 with 1GigPIII@1170MHz & ViVo ...new 3DM2k is 8780 __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

10-17-2001, 11:35 PM	#200
Perry_abx Modulator Join Date: Mar 2001 Location: Saint Paul, MN - USA Posts: 5,912	WOW bajo.... that's a monster score! :eek: Starting to wonder if my GF3 upgrade was a good idea... __________________ Gigabyte GA-P35-DS3L, Intel Core 2 Duo E8400, 2 x 1GB Kingston HyperX DDR2-1066, Palit 9600GT Sonic, Hauppauge WinTV-HVR 1600, 250GB Seagate, 250GB Maxtor, Lite-On XJ-HD166, NEC ND-2510A, Antec SLK3700BQE, Antec SP-500, LG L226WT Widescreen
(Offline)

10-17-2001, 11:36 PM	#201
Rafael Modest...whack job Join Date: Apr 2001 Location: Va. Beach Va. Posts: 1,443	4103 Update: Just picked up another 256mb stick of crappy sdram from my local computer shop. Realizing it was marked "pc133 cas2" I decided to remove my old 256mb stick and run it all alone. WOW! This $38 ram runs at 153fsb ,"133/133/##" ratio, while still set at 2/2/2/7/9. Not bad for 38 bucks. I'm not going to put my old ram back in. @ 1155mhz I now score a 4103 on 3dm2k1, the best score for a P3 & Radeon7500-according to madonion's site. It beats alot of higher clocked Athlons, not an easy thing to do. Dont mean to **** of this sites sponsor, I just got lucky. $ RAF
(Offline)

10-17-2001, 11:46 PM	#202
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,176	Thanks PB, bud !... ...you can still return your card & get a real Monster gem btw - I'm heading to Tom's QIII briefly NOW !! ...wanna get Radeon Fragged?!!:eek: __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

10-18-2001, 07:11 PM	#203
Rafael Modest...whack job Join Date: Apr 2001 Location: Va. Beach Va. Posts: 1,443	O.K., got Radeon 8500 envy. Talked my brother into taking the 7500 off my hands for 1/2 price(I like my brother) and bought an 8500. 6929, under 3dmark2001. P3@1132/151, Radeon NOT overclocked and at default 3dmark2k1 settings. $ RAF
(Offline)

10-19-2001, 01:12 AM	#204
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,176	Welcome aboard bud !!! :eek: __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

10-19-2001, 06:24 PM	#205
Rafael Modest...whack job Join Date: Apr 2001 Location: Va. Beach Va. Posts: 1,443	Thanks Bajo; It was your great score that inspired me. Actually after some further tweaking and a little more o'clocking i turned in a 7210@3dmk2001 defaults late last night. I like this card alot. My 7500 had prettier graphics though, must be a driver issue. $ RAF
(Offline)

10-19-2001, 10:58 PM	#206
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,176	Cool... ..did you install the ATI CD drivers - I noticed that they posted 4.13.7189 on the web, but the ones on CD are 4.13.7191 __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

10-20-2001, 07:24 PM	#207
Rafael Modest...whack job Join Date: Apr 2001 Location: Va. Beach Va. Posts: 1,443	To be honest, since I d/l the 4189 driver the other day, I figured the package HAD to have been packed before the release of the 4189 drivers- so I loaded 4189. There I go thinking again.... Thanks , will try the CD driver now. $ RAF
(Offline)

10-20-2001, 09:15 PM	#208
rjtoo Registered User Join Date: Oct 2001 Location: SASKATOON,SASK. Posts: 341	3dmark2001 score P3800eb@960.asusv7100 175\166.21.83 dets.2301,good or bad thats my score.in 200O no o\c-5100+
(Offline)

10-21-2001, 01:08 AM	#209
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,176	Hey Rafael !!...don't bother with that... ...check the freshest from today !...7199:eek: __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

10-21-2001, 02:03 AM	#210
Rafael Modest...whack job Join Date: Apr 2001 Location: Va. Beach Va. Posts: 1,443	Yeah Bajo; Saw your post about the 7199 drivers right after I posted about the CD drivers. Its just that I am on a dial up connection and it takes forever. Am D/Ling them now. Any comments? Also, in the 3dmark2k1 lobby tests do you see lost of trash in the image as the guy is running from left to right just before drawing his pistols and finishing off the last bad guy? And, do you see a 20pixel or so black square in the middle of the horse on the last test? thanks $ RAF
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode