Hey, post your 3Dmark2001 results here! - Page 4

Stevessvt · 06-12-2001, 06:41 PM

My little p-3 600E o/c to 900 matched up to an Elsa Gladiac 920 GF3 scored 5147, i think that is highest for a p-3 900.

Here it is:
http://gamershq.madonion.com/compare2k1.shtml?1063612

cryogen_abx · 06-13-2001, 11:18 AM

latopa
those scores definately seem low for your system!
i come pretty close to your score with my 800EB at 882/512MB @222-5/7 and a geforce 2 MX.....
i would recommend tryiong to get your RAM to 2-2-2, even if you lose a few MHZ - faster RAM is better than an extra 20MHZ or so..
also, play around with the drivers a bit..the latest are not always the greatest....try a few different revs and im sure you can get that score up a bit..
hth
cryogen

oops - thought u r card was a gf2ddr...still..prolly could get better

BigConig · 06-14-2001, 08:04 PM

5618 with a 933@1064 and a prophet 3
http://gamershq.madonion.com/compare2k1.shtml?986838

klyon · 06-20-2001, 05:13 AM

3dmark 2001=5597
3dmark 2000=9257

Athlon 1333 mhz
Asus V8200 GF 3 (not o/c)

Random_abx · 06-20-2001, 05:55 AM

3m2k1: 3059 with 222-5,9 strong, 120 Mhz FSB, Det.12.41 1006a.tweaked black pearl bios, GF2 @ 220/444, VSyncOff, Max Speed

more specs in details.

Would u say this result is to low? How can I improve these marks? tried different Dets (6.xx,10.80, 12.00, 12.40), 12.41 worked best. 12.60, 12.42 not tested yet.

memphist0 · 06-21-2001, 08:15 PM

P3 700 @ 1050 1.8v
256MB Mushkin rev 2. 222-5/7 strong
CUSL2 1008.005tw bios (Thanks The Mad)
Visiontek GF3 235/530

Damn need to get I more lousy point, tried rerunning it and got 5791
http://gamershq.madonion.com/compare2k1.shtml?1122814

kadron · 06-21-2001, 11:02 PM

3Dmark2001 = 2670

800x600 32 bit no o/c
http://gamershq.madonion.com/compare2k1.shtml?815746

3Dmark2001 = 2909

800x600 32 bit D3 drivers o/c 200/200
http://gamershq.madonion.com/compare2k1.shtml?821836

Both test done in high detail and sound on
Looking at other scores, I feel kinda slow!
---------------

PIII 1 Ghz (133fsb) no o/c
Cusl2-c (1006a)
128mb Crucial Cas2
3D Prophet II MX
Win 98se

bajo · 06-22-2001, 02:45 AM

Gig@1080...1.744v...144fsb...512 mb 133...RadViVo 64mb

3DM2k1 3088

3DM2k 5580

**Perry_abx** · 06-22-2001, 02:56 AM

Not bad BAJO!

You gave the gaming tips tonight... so if you need some OC tips just ask.

1 gig @ 1147, 1.80V, 153FSB, 256MB of Mushkin Rev2 @ 153, Radeon 64 DDR @ 209mhz!

3D2K1: 3666

3D2k: 6131

chipease4 · 06-22-2001, 04:21 AM

http://gamershq.madonion.com/compare2k1.shtml?1125001 -6505

"air-cooled" AMD 1.2@1.37 (153x9), 256mbPc2100 Hyundai ddr (153x2), Visiontek Geforce3 225/515, Asus A7M266

memphist0 · 06-22-2001, 09:45 AM

Try out the 12.90s

I went from 5601 to 5771 just by changing from the 12.40s

You can click on my profile to my setup

bajo · 06-22-2001, 09:46 PM

I noticed that you o'ced your Radeon, what drivers do you use ? I noticed that my 4.13.7115 are very good, maybe better than latest 7131.
I used to go up to 1170 MHz/156FSB, but generic me memory is my limit. I want to keep my v0ltage low, default 1.74v if possible.
Also memory settings are tricky - 3/3/3/ 7/9 is more stable, and I try to keep at least 3/2/3/7/9 Strong, to get SiSof Sandra 397/456
@1080MHz or 412/470 @ 1162MHz (the highest I ever went)

My best STABLE results (Gig@1162MHz) were:

MDK2k1 3256

MDK2k 5358 (old ATI drivers !)l

Thanks & frag ya later

**Perry_abx** · 06-22-2001, 10:12 PM

Yo Bajo!

I reverted back to an early beta 4.13.7072 it is the best one IMO. It's no longer availble for DL at ATI. For overclocking try Raid On Tweaker 5.1

http://www.tweakfiles.com/video/raidontweaker.html

You'll have a hard time running at default voltage above 1100 stable with even the best memory. Don't be SCARED to up the voltage as high as 1.85V if you got a decent HSF. I hit 1178 at 1.85 and looped 3D2K without a crash at memory settings of 2 2 2 7 9 with Mushkin Rev2. I need better cooling though so I'm at 1147 right now. Get 464/539 in Sandra at that speed. At 1178 it was around 485/560!

Start saving the money for some good RAM Bajo. It is worth every penny!

Frag ya late Bud!

Tranced_abx · 06-23-2001, 02:14 AM

3Dmark2001: 625

Celeron 500@562
128MB ApAss 2-2-2 7/9 (set to 5/7, so have to re-run)
Diamond stealth v770

3Dmark specs

My god am I glad I don't play any games on this baby... got a PIII 900 downstairs..

bajo · 06-23-2001, 02:15 AM

...did I hear MUSHKIN RULEZ !!

$$$ :eek:

06-12-2001, 06:41 PM	#46
Stevessvt Registered User Join Date: Mar 2001 Posts: 13	My little p-3 600E o/c to 900 matched up to an Elsa Gladiac 920 GF3 scored 5147, i think that is highest for a p-3 900. Here it is: http://gamershq.madonion.com/compare2k1.shtml?1063612
(Offline)

06-13-2001, 11:18 AM	#47
cryogen_abx Registered User Join Date: Mar 2001 Location: Halifax N.S Canada Posts: 1,350	latopa those scores definately seem low for your system! i come pretty close to your score with my 800EB at 882/512MB @222-5/7 and a geforce 2 MX..... i would recommend tryiong to get your RAM to 2-2-2, even if you lose a few MHZ - faster RAM is better than an extra 20MHZ or so.. also, play around with the drivers a bit..the latest are not always the greatest....try a few different revs and im sure you can get that score up a bit.. hth cryogen oops - thought u r card was a gf2ddr...still..prolly could get better __________________ umm nope
(Offline)

06-14-2001, 08:04 PM	#48
BigConig rebmeM Join Date: May 2001 Location: Rochester, NY Posts: 47	5618 with a 933@1064 and a prophet 3 http://gamershq.madonion.com/compare2k1.shtml?986838 __________________ D875PBZLK (301 p21) 3.4c 2x512MB Mushkin LII 3200 2xSamsung SATA 120GB hd raid 0 Asus 9600XT vivo
(Offline)

06-20-2001, 05:13 AM	#49
klyon Registered User Join Date: Jun 2001 Location: UK Posts: 4	3dmark 2001=5597 3dmark 2000=9257 Athlon 1333 mhz Asus V8200 GF 3 (not o/c)
(Offline)

06-20-2001, 05:55 AM	#50
Random_abx Registered User Join Date: Jun 2001 Location: Central Europe Posts: 34	3m2k1: 3059 with 222-5,9 strong, 120 Mhz FSB, Det.12.41 1006a.tweaked black pearl bios, GF2 @ 220/444, VSyncOff, Max Speed more specs in details. Would u say this result is to low? How can I improve these marks? tried different Dets (6.xx,10.80, 12.00, 12.40), 12.41 worked best. 12.60, 12.42 not tested yet. __________________ Maybe I`ll find someday a nice quotation, but as long ...you`ll just have to read this over and over again!!
(Offline)

06-21-2001, 08:15 PM	#51
memphist0 Registered User Join Date: Jun 2001 Location: L.A. Posts: 332	3DMark 2001: 5799 P3 700 @ 1050 1.8v 256MB Mushkin rev 2. 222-5/7 strong CUSL2 1008.005tw bios (Thanks The Mad) Visiontek GF3 235/530 Damn need to get I more lousy point, tried rerunning it and got 5791 http://gamershq.madonion.com/compare2k1.shtml?1122814 Last edited by memphist0 : 06-21-2001 at 09:44 PM.
(Offline)

06-21-2001, 11:02 PM	#52
kadron Gone too Long Join Date: Apr 2001 Location: L.I., New York Posts: 1,455	3Dmark2001 = 2670 800x600 32 bit no o/c http://gamershq.madonion.com/compare2k1.shtml?815746 3Dmark2001 = 2909 800x600 32 bit D3 drivers o/c 200/200 http://gamershq.madonion.com/compare2k1.shtml?821836 Both test done in high detail and sound on Looking at other scores, I feel kinda slow! --------------- PIII 1 Ghz (133fsb) no o/c Cusl2-c (1006a) 128mb Crucial Cas2 3D Prophet II MX Win 98se __________________ He Who Laughs Last Thinks Slowest If it's not broken, you didn't mess with it enough. If it is broken, chances are the warranty is expired. Specs (way out of date - I have a P4 now) http://www.mindspring.com/~kadron/pc.htm
(Offline)

06-22-2001, 02:45 AM	#53
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,152	Just started o'cin my GigP3 again... Gig@1080...1.744v...144fsb...512 mb 133...RadViVo 64mb 3DM2k1 3088 3DM2k 5580 __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

06-22-2001, 02:56 AM	#54
Perry_abx Modulator Join Date: Mar 2001 Location: Saint Paul, MN - USA Posts: 5,912	Not bad BAJO! You gave the gaming tips tonight... so if you need some OC tips just ask. 1 gig @ 1147, 1.80V, 153FSB, 256MB of Mushkin Rev2 @ 153, Radeon 64 DDR @ 209mhz! 3D2K1: 3666 3D2k: 6131 __________________ Gigabyte GA-P35-DS3L, Intel Core 2 Duo E8400, 2 x 1GB Kingston HyperX DDR2-1066, Palit 9600GT Sonic, Hauppauge WinTV-HVR 1600, 250GB Seagate, 250GB Maxtor, Lite-On XJ-HD166, NEC ND-2510A, Antec SLK3700BQE, Antec SP-500, LG L226WT Widescreen
(Offline)

06-22-2001, 04:21 AM	#55
chipease4 Registered User Join Date: Feb 2001 Location: Silicon Valley Posts: 353	http://gamershq.madonion.com/compare2k1.shtml?1125001 -6505 "air-cooled" AMD 1.2@1.37 (153x9), 256mbPc2100 Hyundai ddr (153x2), Visiontek Geforce3 225/515, Asus A7M266
(Offline)

06-22-2001, 09:45 AM	#56
memphist0 Registered User Join Date: Jun 2001 Location: L.A. Posts: 332	Try out the 12.90s I went from 5601 to 5771 just by changing from the 12.40s You can click on my profile to my setup
(Offline)

06-22-2001, 09:46 PM	#57
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,152	Hey PB !! anytime, anygame.. I noticed that you o'ced your Radeon, what drivers do you use ? I noticed that my 4.13.7115 are very good, maybe better than latest 7131. I used to go up to 1170 MHz/156FSB, but generic me memory is my limit. I want to keep my v0ltage low, default 1.74v if possible. Also memory settings are tricky - 3/3/3/ 7/9 is more stable, and I try to keep at least 3/2/3/7/9 Strong, to get SiSof Sandra 397/456 @1080MHz or 412/470 @ 1162MHz (the highest I ever went) My best STABLE results (Gig@1162MHz) were: MDK2k1 3256 MDK2k 5358 (old ATI drivers !)l Thanks & frag ya later __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1 Last edited by bajo : 06-22-2001 at 09:53 PM.*
(Offline)

06-22-2001, 10:12 PM	#58
Perry_abx Modulator Join Date: Mar 2001 Location: Saint Paul, MN - USA Posts: 5,912	Yo Bajo! I reverted back to an early beta 4.13.7072 it is the best one IMO. It's no longer availble for DL at ATI. For overclocking try Raid On Tweaker 5.1 http://www.tweakfiles.com/video/raidontweaker.html You'll have a hard time running at default voltage above 1100 stable with even the best memory. Don't be SCARED to up the voltage as high as 1.85V if you got a decent HSF. I hit 1178 at 1.85 and looped 3D2K without a crash at memory settings of 2 2 2 7 9 with Mushkin Rev2. I need better cooling though so I'm at 1147 right now. Get 464/539 in Sandra at that speed. At 1178 it was around 485/560! Start saving the money for some good RAM Bajo. It is worth every penny! Frag ya late Bud! __________________ Gigabyte GA-P35-DS3L, Intel Core 2 Duo E8400, 2 x 1GB Kingston HyperX DDR2-1066, Palit 9600GT Sonic, Hauppauge WinTV-HVR 1600, 250GB Seagate, 250GB Maxtor, Lite-On XJ-HD166, NEC ND-2510A, Antec SLK3700BQE, Antec SP-500, LG L226WT Widescreen
(Offline)

06-23-2001, 02:14 AM	#59
Tranced_abx Who, me? Join Date: Jun 2001 Location: N51°34'01.5" E5°03'54.9" Posts: 1,631	3Dmark2001: 625 Celeron 500@562 128MB ApAss 2-2-2 7/9 (set to 5/7, so have to re-run) Diamond stealth v770 3Dmark specs My god am I glad I don't play any games on this baby... got a PIII 900 downstairs.. __________________ Laptop: P4 3.2/800 HT 1Gb DDR400 60gb 7200rpm Server: Asus S-Presso P4 2.8/800 HT 512MB DDR400 250GB SATA
(Offline)

06-23-2001, 02:15 AM	#60
bajo C1eaner Join Date: Feb 2001 Location: TX, USA Posts: 17,152	I know, I know... ...did I hear MUSHKIN RULEZ !! $$$ :eek: __________________ USA "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." Duke (The Shootist) Gigabyte_AGP_LGA775, PentiumD960_dual core 3.6GHz, SapphireHD3850_AGP512MB_DDR2, WD RaptorX 150GB SATA_clearTop_16MB + Seagate 1TB SATA_32MB, CorsairDominator 2GB 8500_1066MHz, Dell 24" 2408WFP *AGP +DVIx2 +HDMI +DisplayPort +USB2x4, XPproSP3 Inspiron9400 17"uxga CentrinoC2duoT7600_2.39GHz_685MHz 4GB Micron6400@800_675_400MHz GeForceGo7900GSMobileForce_M6Enhanced_256MB 2x200GbSATA_7200rpm_16MBcache Vista hp, VistaP6001SP1
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode