Is your CPU ready for the CRAPMARKS test? - Page 5

FB · 02-19-2005, 11:02 PM

w00t, with everything in my sig

*SRTDodge05* · 02-19-2005, 11:06 PM

i got 2801

Deer Slayer · 02-20-2005, 01:18 AM

Does that mean my underwear are OK, or do I need to change them? What's the difference between a crapmark and a skidmark? Man, I'd say 4000+ is a bit messy, definetly time for a change. Sounds like we're in need of some better TP arround here.

SupDawg · 02-20-2005, 01:37 AM

Quote:

Originally Posted by Darkfalz

4609??!?!?!

That's a god damn record by a mile. What system was that run on?

Welp, FB got me,

I have a Athlon 64 3500 @ 2.5ghz, clearly this test favors AMD.

FB · 02-20-2005, 01:39 AM

mine is at 2.6Ghz, what are your ram timings?

SupDawg · 02-20-2005, 01:44 AM

Quote:

Originally Posted by FB -|-+

mine is at 2.6Ghz, what are your ram timings?

Crap ATM.... Got to run a divider... My OCZ gold rev 3s don't like to do much more than 466.. It's probably my fault. I just need to spend some time getting the timings right.

What vcore you have to run for 2.6? Me, I got to run @ 1.625 I have a Newcastle. I am more worried about CPU speed anyways.. Got to keep those hot folders off my back.. lol

FB · 02-20-2005, 02:02 AM

Quote:

Originally Posted by SupDawg

Crap ATM.... Got to run a divider... My OCZ gold rev 3s don't like to do much more than 466.. It's probably my fault. I just need to spend some time getting the timings right.

What vcore you have to run for 2.6? Me, I got to run @ 1.625 I have a Newcastle. I am more worried about CPU speed anyways.. Got to keep those hot folders off my back.. lol

1.45v

and 1:1 but i have to run 2.5-3-3-7 (never tested much else out though)

Glorfy · 02-20-2005, 02:16 AM

Holy crpmark batman. This DFI seems an inconsistent performer! Loves 3D not so hot on the memory bandwidth side of things. Oh well! Heres mne at 2722!

FB · 02-20-2005, 02:22 AM

Quote:

Originally Posted by Glorfy

Holy crpmark batman. This DFI seems an inconsistent performer! Loves 3D not so hot on the memory bandwidth side of things. Oh well! Heres mne at 2722!

thats because no one wants to give the Giga boards a chance.

Glorfy · 02-20-2005, 02:39 AM

Quote:

Originally Posted by FB -|-+

thats because no one wants to give the Giga boards a chance.

Hey, my gigabyte NF4 board would have wiped the floor with my DFI board in this type of test - and that's running 2.5,3,3,7 on memory, rather than my current 1.5,2,2,5! I really did like that board. Still I prefer my DFI. Compare CPUscores in something like aquamark and the situation is seriously reversed!
Take PCmark 04, and again the gigabyte wipes the floor with the DFI, 100+ more points with a lower O/C!

I'm gonna have another go I think with my memory maxed out not the CPU....

FB · 02-20-2005, 02:48 AM

Quote:

Originally Posted by Glorfy

Hey, my gigabyte NF4 board would have wiped the floor with my DFI board in this type of test - and that's running 2.5,3,3,7 on memory, rather than my current 1.5,2,2,5! I really did like that board. Still I prefer my DFI. Compare CPUscores in something like aquamark and the situation is seriously reversed!
Take PCmark 04, and again the gigabyte wipes the floor with the DFI, 100+ more points with a lower O/C!

I'm gonna have another go I think with my memory maxed out not the CPU....

i guess that is the way it goes with anything really

Drufuss · 03-08-2005, 02:35 PM

He, my rig got 1335 crapmark points!

Before you start laughing, this is a CUSL2-C.

Greetings

Dru

Deer Slayer · 03-08-2005, 03:36 PM

It should come out in the wash, just remember to pre-soak it, and use bleach. Those crapmarks can be a little tricky to get rid of, especially if you let them set in all day.

SupDawg · 03-08-2005, 03:44 PM

Quote:

Originally Posted by Deer Slayer

It should come out in the wash, just remember to pre-soak it, and use bleach. Those crapmarks can be a little tricky to get rid of, especially if you let them set in all day.

Nubbins · 03-13-2005, 05:42 PM

here's my crap

02-19-2005, 11:02 PM	#61
FB Re-Retiring Join Date: Sep 2002 Location: MN, USA Posts: 24,834	w00t, with everything in my sig __________________ Bye Bye ABXZone.....Rest In Peace. Last edited by FB : 02-01-2006 at 03:34 AM.
(Offline)

02-19-2005, 11:06 PM	#62
SRTDodge05 Grab Life By The Balls Join Date: Jan 2003 Location: Michigan Posts: 7,830	i got 2801
(Online)

02-20-2005, 01:18 AM	#63
Deer Slayer Unscanable!!! Tatoo??? Join Date: Dec 2002 Location: Howell Michigan Posts: 3,837	I only get 2600 crapmarks. Does that mean my underwear are OK, or do I need to change them? What's the difference between a crapmark and a skidmark? Man, I'd say 4000+ is a bit messy, definetly time for a change. Sounds like we're in need of some better TP arround here.
(Offline)

02-20-2005, 01:39 AM	#65
FB Re-Retiring Join Date: Sep 2002 Location: MN, USA Posts: 24,834	mine is at 2.6Ghz, what are your ram timings? __________________ Bye Bye ABXZone.....Rest In Peace.
(Offline)

03-08-2005, 02:35 PM	#72
Drufuss CUSL2-C -> P5Q ? Join Date: Feb 2002 Location: Österreich Posts: 2,763	He, my rig got 1335 crapmark points! Before you start laughing, this is a CUSL2-C. Greetings Dru __________________ System specs: Asus P5Q Core 2 Quad Q9550 2.83 GHz @ 3.42 GHz 4 x 2GB DDR2-Ram PC2-1066 Corsair Dominator @ 800MHz 3 x Seagate 7200.ESII 500GB SATA Sapphire HD4870X2 2048MB Soundblaster Audigy 2 ZS, Hauppauge HVR4000 DVB-S/S2/T, Dlink DWL-G510, Logitech Z-5450 5.1 THX Wireless Enermax Modu82+ 625W Win XP MCE 2005, openSuse Linux 11 64bit, Vista Home Premium 64bit CUSL2-C ruled! ..äh... RulEd! Time flies like an arrow, fruit flies like a banana.
(Offline)

03-08-2005, 03:36 PM	#73
Deer Slayer Unscanable!!! Tatoo??? Join Date: Dec 2002 Location: Howell Michigan Posts: 3,837	Well, Dru, I think you'll be ok with that. It should come out in the wash, just remember to pre-soak it, and use bleach. Those crapmarks can be a little tricky to get rid of, especially if you let them set in all day.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode