![]() | |
|
Welcome to the ABXZone Computer Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 |
| Registered User Join Date: Mar 2001 Location: Mushkin Tropical Island
Posts: 2,563
| ![]() All the Latest Tweaked Bios From Brazillian Tech that cover: 1) ALL ASUS's OFFICIAL BIOS RELEASES 2) "FXD" BIOS (Temp Fix) 3) "X/FXD" BIOS (these BIOS try to fix or minimize the problems with data corruption with VIA/Promise IDE Controllers and/or Sound Blaster Live! isues) 4) BIOS ONLY FOR "A7V-133 with Full RAID Support" 5) BIOS & DRIVERS ONLY FOR "A7V-RAID" 6) ASUS DISPLAY DRIVERS FOR NVIDIA BASED CARDS Visit the site here: http://english.braziliantech.com/ Great Thanks to Daniel. Send an e-mail to Daniel, with your comments, problems and suggestions here: dkbox2000@hotmail.com Note: The latest final bios 1005 for A7V133 is also covered both for Tweaked FULLY RAID Support & FXD with temperature improvement. |
| (Offline) | |
| | #2 |
| Registered User Join Date: Mar 2001 Location: Mushkin Tropical Island
Posts: 2,563
| Using the latest bios 1005 fxd from Brazillian Tech is also good, dropping the temp by 9 to 10 C, Amazing. The only drawback, is that you have to set the PCI Latency to only 32. If you set it at 64 (better performance), it will crashed as soon as Windows log in. Also, using this 1005 fxd bios limits my fsb to as high as 160, I can't go 162 or above. As soon as Windows starts that welcome short song, it freezes. So 160 is excellent & stable with 9 to 10 C drops. Check with WPCUID, the registry 52 is set to EB (good) and that means Features: "Disconnect Enable when STPGNT Detected" is also ENABLED. You have to set the PCI Master Read Caching to Enabled in Bios. Thanks to Daniel............ |
| (Offline) | |
![]() |
| Thread Tools | |
| Display Modes | |
| |