Got my new Core 2 Duo 3ghz, Having some problems - Page 9

plainman007 · 06-25-2008, 12:45 AM

Hi Ctal > Hope your doing well. I was travelling for a couple of weeks and couldnt log on. Ill still try to find the manual of the monitor it must be somewhere here. I tried many possible combinations and wasnt satisfied. Its still got that mild ghosting image kinda effect around text. The refresh rate is however set to 60 Hz only. Hmmm...ok ill try posting a seperate thread on this one if i dont seem to get it sorted out. It took Intel a month to replace the board.

plainman007 · 06-25-2008, 02:48 AM

Ctal > CPUZ shows that my memory is 400Mhz while its actually 800Mhz. Is this normal ? It also mentions running in dual channel. Does this mean 400 Mhz per channel ?

Drufuss · 06-25-2008, 03:10 AM

Hi plainman007,

Quote:

Originally Posted by plainman007

Ctal > CPUZ shows that my memory is 400Mhz while its actually 800Mhz. Is this normal ? It also mentions running in dual channel. Does this mean 400 Mhz per channel ?

400 MHZ is the bus frequency, so it is 800MHZ DDR (Double Data Rate), so "yes, it's normal".

Dual Channel is good, it uses two 64 bit channels to your RAM, so the actual bandwith is 128 bit.

Greetings

Dru

P.S.: Ctal, hope you don't mind that i answered a question directed at you. It seems to be that i'm in a very "answering"-mood today.

ctal · 06-25-2008, 09:14 AM

Your inputs are always most welcome and helpful, Dru; thanks!

DDR, DDR2, and DDR3 work off of both the positive-going and negative-going edges of the clock provided to them, so a 400 MHz memory clock results in an 800 MHz effective rate. As Dru indicated, the dual channel feature is a separate feature that happens to also double overall throughput.

Regards,
-- Al

plainman007 · 06-25-2008, 01:20 PM

Thanks DRufuss.

Ctal > Good,,,today i added 2 more 1 gb sticks of ram to my edit workstation.
So thats 4 gb in all. All 800 mhz. But windows recognizes only 3.25 gb as i already expected. But just added this cause ive heard at lest teh windows kernel etc would benefit buy having all 4 slots occupied and even the unrecognized .75 gb would help windows indirectly. PS: this isnt my trouble system mentioned here which is just getting started after the intel returned the board. This is the other system but was just tempted to mention it.

Drufuss · 06-29-2008, 12:27 PM

All our slots occupied is good, so you can use Dual Channel.

The 0.75 GB of "missing" RAM are not used, because 32 bit windows has address space for 4GB but some of these addresses are already in use for other system components for example.

Greetings

Dru

06-25-2008, 12:45 AM	#121
plainman007 Registered User Join Date: Mar 2008 Posts: 167	Re: Got my new Core 2 Duo 3ghz, Having some problems Hi Ctal > Hope your doing well. I was travelling for a couple of weeks and couldnt log on. Ill still try to find the manual of the monitor it must be somewhere here. I tried many possible combinations and wasnt satisfied. Its still got that mild ghosting image kinda effect around text. The refresh rate is however set to 60 Hz only. Hmmm...ok ill try posting a seperate thread on this one if i dont seem to get it sorted out. It took Intel a month to replace the board.
(Offline)

06-25-2008, 02:48 AM	#122
plainman007 Registered User Join Date: Mar 2008 Posts: 167	Re: Got my new Core 2 Duo 3ghz, Having some problems Ctal > CPUZ shows that my memory is 400Mhz while its actually 800Mhz. Is this normal ? It also mentions running in dual channel. Does this mean 400 Mhz per channel ?
(Offline)

06-25-2008, 09:14 AM	#124
ctal Eschews Obfuscation Join Date: Sep 2003 Location: Connecticut, USA Posts: 1,314	Re: Got my new Core 2 Duo 3ghz, Having some problems Your inputs are always most welcome and helpful, Dru; thanks! DDR, DDR2, and DDR3 work off of both the positive-going and negative-going edges of the clock provided to them, so a 400 MHz memory clock results in an 800 MHz effective rate. As Dru indicated, the dual channel feature is a separate feature that happens to also double overall throughput. Regards, -- Al __________________ "I didn't say I didn't say it. I said that I didn't say that I said it. I want to make that very clear." -- George Romney, in 1968, while campaigning for the Republican nomination for President of the United States.
(Offline)

06-25-2008, 01:20 PM	#125
plainman007 Registered User Join Date: Mar 2008 Posts: 167	Re: Got my new Core 2 Duo 3ghz, Having some problems Thanks DRufuss. Ctal > Good,,,today i added 2 more 1 gb sticks of ram to my edit workstation. So thats 4 gb in all. All 800 mhz. But windows recognizes only 3.25 gb as i already expected. But just added this cause ive heard at lest teh windows kernel etc would benefit buy having all 4 slots occupied and even the unrecognized .75 gb would help windows indirectly. PS: this isnt my trouble system mentioned here which is just getting started after the intel returned the board. This is the other system but was just tempted to mention it.
(Offline)

06-29-2008, 12:27 PM	#126
Drufuss CUSL2-C -> P5Q ? Join Date: Feb 2002 Location: Österreich Posts: 2,767	Re: Got my new Core 2 Duo 3ghz, Having some problems All our slots occupied is good, so you can use Dual Channel. The 0.75 GB of "missing" RAM are not used, because 32 bit windows has address space for 4GB but some of these addresses are already in use for other system components for example. Greetings Dru __________________ System specs: Asus P5Q Core 2 Quad Q9550 2.83 GHz @ 3.42 GHz 4 x 2GB DDR2-Ram PC2-1066 Corsair Dominator @ 800MHz 3 x Seagate 7200.ESII 500GB SATA Sapphire HD4870X2 2048MB Soundblaster Audigy 2 ZS, Hauppauge HVR4000 DVB-S/S2/T, Dlink DWL-G510, Logitech Z-5450 5.1 THX Wireless Enermax Modu82+ 625W Win XP MCE 2005, openSuse Linux 11 64bit, Vista Home Premium 64bit CUSL2-C ruled! ..äh... RulEd! Time flies like an arrow, fruit flies like a banana.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode