Toot your horn here. - Page 104

phalinx · 04-03-2005, 10:16 PM

I've been down for a while. I decomissioned my old server (GA-8IHXP2) and installed a new server. My new server/workstation is an Iwill DH800 w/2 x 3.4 Nocona's and 1gb of Geil Ultra Plat soon to be 2 gb. My P4C800 w.30c is still going strong.

Cheers

Phalinx

VSEKH · 04-03-2005, 10:25 PM

Welcome to the Nocona family phalinx.

phalinx · 04-04-2005, 07:56 AM

VSEKH

Thank you. It feels great! I wanted a server/workstation for a long time, but I had a real troubling time setting it up. There are several things that this board doesn't like.

Things not to use with an Iwill DH800:

1. Bluetooth mouse w/o key(which is not required) gave me bsod. I also tried turning off usb legacy support. Changed out to wireless intellimouse explorer..no more problems..

2. PDP patriot 3200 xblk did not like to be in that board. Had memory errors for some reason. Maybe it didn't like 4x512 running @2225?? I also used relaxed timings. No go. Changed to Geil ultra plat 4200...works now

3. My eVGA 6800GT had many graphical gliches. Thought I had damaged the card somehow. Nope. Changed out ram and changed out the drivers. I'm now back to 66.93.

Everything is running fine.

Cheers

Phalinx

VSEKH · 04-05-2005, 09:53 PM

I currently have my memory timings set to 2-2-3-6 right now with the 4 Kingston 512MB chips. I originally set the memory timings to 2-2-2-5. XP would bootup fine without any problems. But, the 600 point gromacs were all ending early. I tried just a pair of 512MB memory chips with memory timings set to 2-2-2-5, but the gromacs will still ending early. I put all 4 chips back and tried 2-2-2-6 memory timings, but they still were ending early. I settled on 2-2-3-6.

I was going to buy the Iwill DH800 motherboard, but Newegg was the only one selling this motherboard. Newegg had screwed me on a return, so I don't buy from them anymore. A lot of online stores were selling the Asus NCCH-DL motherboard and went with this motherboard.

Good luck with your new system.

BTW, are you folding 4 consoles at the sametime?

FB · 04-06-2005, 11:38 AM

60000 points for me

phalinx · 04-06-2005, 12:46 PM

Yes, I'm folding with 4 consoles. Currently testing for stability. 3 of them are set for 100% and the other is 75%. The left over is for running other apps as needed.

I sent you a PM relating to cpu voltage. MBM reports cpu0 2.21v and cpu1 as 1.34v. The same with aida32. Sandra is a little better, but it only reports cpu2's voltage...1.41v?? I have my cpu voltage set to auto in the bios. Is there a problem or is it that these programs aren't smp aware?

edit: had to stop folding this morning. I had a browser server problem. The dh800 would reboot. Problem is resolved now. Had to disable service...

Cheers

Phalinx

zsaz1029 · 04-06-2005, 06:47 PM

Quote:

Originally Posted by FB

60000 points for me

Congrats FB!

epicbard · 04-06-2005, 07:21 PM

YAH WAY TO GO FBI!!!

damn i wish i had some 600ptrs

VSEKH · 04-06-2005, 09:29 PM

Nice going FB in passing the 60,000 point mark!!

VSEKH · 04-06-2005, 09:31 PM

Quote:

Originally Posted by phalinx

Yes, I'm folding with 4 consoles. Currently testing for stability. 3 of them are set for 100% and the other is 75%. The left over is for running other apps as needed.

I sent you a PM relating to cpu voltage. MBM reports cpu0 2.21v and cpu1 as 1.34v. The same with aida32. Sandra is a little better, but it only reports cpu2's voltage...1.41v?? I have my cpu voltage set to auto in the bios. Is there a problem or is it that these programs aren't smp aware?

edit: had to stop folding this morning. I had a browser server problem. The dh800 would reboot. Problem is resolved now. Had to disable service...

Cheers

Phalinx

I believe MBM does not support this motherboard. The other programs do not report the TEMPS and voltages correctly.

Did Iwill include a monitoring program with the motherboard?

phalinx · 04-07-2005, 05:27 PM

Passed 20K today

Cheers

Phalinx

zsaz1029 · 04-07-2005, 06:15 PM

Quote:

Originally Posted by phalinx

Passed 20K today

Congrats!

VSEKH · 04-09-2005, 10:43 AM

Congrats on passing the 20,000 point mark phalinx.

phalinx · 04-09-2005, 04:42 PM

Thanks you both!

I'm now @ 22k...

Cheers

Phalinx

phalinx · 04-19-2005, 08:34 PM

Just hit 30k+ today

Cheers

Phalinx

04-03-2005, 10:16 PM	#1546
phalinx The SilentSentinel Join Date: Mar 2004 Location: Texas Posts: 805	I've been down for a while. I decomissioned my old server (GA-8IHXP2) and installed a new server. My new server/workstation is an Iwill DH800 w/2 x 3.4 Nocona's and 1gb of Geil Ultra Plat soon to be 2 gb. My P4C800 w.30c is still going strong. Cheers Phalinx __________________ "Few are the Heroes upon this Globe who deserve the reward of Michelob." David Blackshire FOLD FOR ABXZONE 1714
(Offline)

04-03-2005, 10:25 PM	#1547
VSEKH Fold for ABX Join Date: Jul 2003 Location: Illinois Posts: 11,926	Welcome to the Nocona family phalinx. __________________ Folding Rig:Gigabyte GA-P35-DQ6, QX9650 cooled with a Zalman 9700NT, Powercolor X300SE, Audigy2zs, 4G DDR2-800 Mushkin memory, Plextor PX-760, Pair of 74GB WD Raptors in Raid0 & Seagate 750GB SATA drives, PC Power & Cooling 610 watt PSU, Coolermaster Cosmos case Gaming Rig: Asus Maximus Formula SE, Intel QX9650 cooled with a Zalman 9700NT, EVGA 8800GTX, 4GB of GSkill DDR2-1000, Audigy XFi fatality, Samsung 203B, Pair of 150GB WD Raptors in Raid0 & 1TB Hitachi Sata hard drives, PC Power & Cooling 750 watt PSU, Coolermaster Stacker STC-T01 case
(Offline)

04-04-2005, 07:56 AM	#1548
phalinx The SilentSentinel Join Date: Mar 2004 Location: Texas Posts: 805	VSEKH Thank you. It feels great! I wanted a server/workstation for a long time, but I had a real troubling time setting it up. There are several things that this board doesn't like. Things not to use with an Iwill DH800: 1. Bluetooth mouse w/o key(which is not required) gave me bsod. I also tried turning off usb legacy support. Changed out to wireless intellimouse explorer..no more problems.. 2. PDP patriot 3200 xblk did not like to be in that board. Had memory errors for some reason. Maybe it didn't like 4x512 running @2225?? I also used relaxed timings. No go. Changed to Geil ultra plat 4200...works now 3. My eVGA 6800GT had many graphical gliches. Thought I had damaged the card somehow. Nope. Changed out ram and changed out the drivers. I'm now back to 66.93. Everything is running fine. Cheers Phalinx __________________ "Few are the Heroes upon this Globe who deserve the reward of Michelob." David Blackshire FOLD FOR ABXZONE 1714
(Offline)

04-05-2005, 09:53 PM	#1549
VSEKH Fold for ABX Join Date: Jul 2003 Location: Illinois Posts: 11,926	I currently have my memory timings set to 2-2-3-6 right now with the 4 Kingston 512MB chips. I originally set the memory timings to 2-2-2-5. XP would bootup fine without any problems. But, the 600 point gromacs were all ending early. I tried just a pair of 512MB memory chips with memory timings set to 2-2-2-5, but the gromacs will still ending early. I put all 4 chips back and tried 2-2-2-6 memory timings, but they still were ending early. I settled on 2-2-3-6. I was going to buy the Iwill DH800 motherboard, but Newegg was the only one selling this motherboard. Newegg had screwed me on a return, so I don't buy from them anymore. A lot of online stores were selling the Asus NCCH-DL motherboard and went with this motherboard. Good luck with your new system. BTW, are you folding 4 consoles at the sametime? __________________ Folding Rig:Gigabyte GA-P35-DQ6, QX9650 cooled with a Zalman 9700NT, Powercolor X300SE, Audigy2zs, 4G DDR2-800 Mushkin memory, Plextor PX-760, Pair of 74GB WD Raptors in Raid0 & Seagate 750GB SATA drives, PC Power & Cooling 610 watt PSU, Coolermaster Cosmos case Gaming Rig: Asus Maximus Formula SE, Intel QX9650 cooled with a Zalman 9700NT, EVGA 8800GTX, 4GB of GSkill DDR2-1000, Audigy XFi fatality, Samsung 203B, Pair of 150GB WD Raptors in Raid0 & 1TB Hitachi Sata hard drives, PC Power & Cooling 750 watt PSU, Coolermaster Stacker STC-T01 case
(Offline)

04-06-2005, 11:38 AM	#1550
FB Re-Retiring Join Date: Sep 2002 Location: MN, USA Posts: 24,834	60000 points for me __________________ Bye Bye ABXZone.....Rest In Peace.
(Offline)

04-06-2005, 12:46 PM	#1551
phalinx The SilentSentinel Join Date: Mar 2004 Location: Texas Posts: 805	Yes, I'm folding with 4 consoles. Currently testing for stability. 3 of them are set for 100% and the other is 75%. The left over is for running other apps as needed. I sent you a PM relating to cpu voltage. MBM reports cpu0 2.21v and cpu1 as 1.34v. The same with aida32. Sandra is a little better, but it only reports cpu2's voltage...1.41v?? I have my cpu voltage set to auto in the bios. Is there a problem or is it that these programs aren't smp aware? edit: had to stop folding this morning. I had a browser server problem. The dh800 would reboot. Problem is resolved now. Had to disable service... Cheers Phalinx __________________ "Few are the Heroes upon this Globe who deserve the reward of Michelob." David Blackshire FOLD FOR ABXZONE 1714
(Offline)

04-06-2005, 07:21 PM	#1553
epicbard mmm... bacon bits Join Date: Dec 2002 Location: Treehouse Posts: 4,266	YAH WAY TO GO FBI!!! damn i wish i had some 600ptrs __________________
(Offline)

04-06-2005, 09:29 PM	#1554
VSEKH Fold for ABX Join Date: Jul 2003 Location: Illinois Posts: 11,926	Nice going FB in passing the 60,000 point mark!! __________________ Folding Rig:Gigabyte GA-P35-DQ6, QX9650 cooled with a Zalman 9700NT, Powercolor X300SE, Audigy2zs, 4G DDR2-800 Mushkin memory, Plextor PX-760, Pair of 74GB WD Raptors in Raid0 & Seagate 750GB SATA drives, PC Power & Cooling 610 watt PSU, Coolermaster Cosmos case Gaming Rig: Asus Maximus Formula SE, Intel QX9650 cooled with a Zalman 9700NT, EVGA 8800GTX, 4GB of GSkill DDR2-1000, Audigy XFi fatality, Samsung 203B, Pair of 150GB WD Raptors in Raid0 & 1TB Hitachi Sata hard drives, PC Power & Cooling 750 watt PSU, Coolermaster Stacker STC-T01 case
(Offline)

04-07-2005, 05:27 PM	#1556
phalinx The SilentSentinel Join Date: Mar 2004 Location: Texas Posts: 805	Passed 20K today Cheers Phalinx __________________ "Few are the Heroes upon this Globe who deserve the reward of Michelob." David Blackshire FOLD FOR ABXZONE 1714
(Offline)

04-09-2005, 10:43 AM	#1558
VSEKH Fold for ABX Join Date: Jul 2003 Location: Illinois Posts: 11,926	Congrats on passing the 20,000 point mark phalinx. __________________ Folding Rig:Gigabyte GA-P35-DQ6, QX9650 cooled with a Zalman 9700NT, Powercolor X300SE, Audigy2zs, 4G DDR2-800 Mushkin memory, Plextor PX-760, Pair of 74GB WD Raptors in Raid0 & Seagate 750GB SATA drives, PC Power & Cooling 610 watt PSU, Coolermaster Cosmos case Gaming Rig: Asus Maximus Formula SE, Intel QX9650 cooled with a Zalman 9700NT, EVGA 8800GTX, 4GB of GSkill DDR2-1000, Audigy XFi fatality, Samsung 203B, Pair of 150GB WD Raptors in Raid0 & 1TB Hitachi Sata hard drives, PC Power & Cooling 750 watt PSU, Coolermaster Stacker STC-T01 case
(Offline)

04-09-2005, 04:42 PM	#1559
phalinx The SilentSentinel Join Date: Mar 2004 Location: Texas Posts: 805	Thanks you both! I'm now @ 22k... Cheers Phalinx __________________ "Few are the Heroes upon this Globe who deserve the reward of Michelob." David Blackshire FOLD FOR ABXZONE 1714
(Offline)

04-19-2005, 08:34 PM	#1560
phalinx The SilentSentinel Join Date: Mar 2004 Location: Texas Posts: 805	Just hit 30k+ today Cheers Phalinx __________________ "Few are the Heroes upon this Globe who deserve the reward of Michelob." David Blackshire FOLD FOR ABXZONE 1714
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode