A8R32-MVP w/4GB

Riptide · 02-16-2008, 04:42 PM

I'm having a problem with this motherboard. 4x1GB, pc3200 OCZ3200EL

If both matched pairs are installed the system will no longer properly recognize the 7950GX2 video card. In fact, Vista Ultimate completely loses the Display Adapter subsection in device manager. You still get a picture on the screen ofcourse, but it's using the default standard VGA driver.

Nvidia driver refuses to load entirely.

If we remove one set of matched DIMMs (so it's back to 2x1) then it starts to work. The board does not seem to like all 4 DIMM slots filled.

We have the memory hole enabled in the BIOS but turning it off doesn't help - it just keeps Vista from seeing all 4GB.

*SRTDodge05* · 02-16-2008, 04:46 PM

I would check to see if the memory timing is at default and check the voltage for the memory.

Riptide · 02-16-2008, 05:10 PM

vDIMM is set to 2.7v. Command rate 2T. Clock 200Mhz. And timings are set properly.

Hardware memory hole is enabled. 4GB shows up in Vista under properties for the system. But it refuses to see the video cards properly. He takes 2GB out and it works again.

There is a PCI-PCI bridge showing up device manager with an exclamation point. Removing it doesn't help. Comes back in a problem state again and complains about insufficient address space for it to load.

*SRTDodge05* · 02-16-2008, 05:16 PM

Check to see if there is a bios update you can get.

02-16-2008, 04:42 PM	#1
Riptide Avtomat Kalashnikova 1947 Join Date: Sep 2002 Location: Billings, MT Posts: 1,324	A8R32-MVP w/4GB I'm having a problem with this motherboard. 4x1GB, pc3200 OCZ3200EL If both matched pairs are installed the system will no longer properly recognize the 7950GX2 video card. In fact, Vista Ultimate completely loses the Display Adapter subsection in device manager. You still get a picture on the screen ofcourse, but it's using the default standard VGA driver. Nvidia driver refuses to load entirely. If we remove one set of matched DIMMs (so it's back to 2x1) then it starts to work. The board does not seem to like all 4 DIMM slots filled. We have the memory hole enabled in the BIOS but turning it off doesn't help - it just keeps Vista from seeing all 4GB. __________________ Intel C2D E6850 8GB Corsair DDR2 800 Abit IP35 Pro BFG 8800GTXOC2 Auzentech X-Plosion WD1500ADFD Pioneer DVR-710 PCP&C Silencer 610 TT Tsunami Westinghouse LVM-37W3 Folding for Team# 35216 : Nv News + OSNN + SP
(Offline)

02-16-2008, 04:46 PM	#2
SRTDodge05 Grab Life By The Balls Join Date: Jan 2003 Location: Michigan Posts: 7,817	Re: A8R32-MVP w/4GB I would check to see if the memory timing is at default and check the voltage for the memory.
(Online)

02-16-2008, 05:10 PM	#3
Riptide Avtomat Kalashnikova 1947 Join Date: Sep 2002 Location: Billings, MT Posts: 1,324	Re: A8R32-MVP w/4GB vDIMM is set to 2.7v. Command rate 2T. Clock 200Mhz. And timings are set properly. Hardware memory hole is enabled. 4GB shows up in Vista under properties for the system. But it refuses to see the video cards properly. He takes 2GB out and it works again. There is a PCI-PCI bridge showing up device manager with an exclamation point. Removing it doesn't help. Comes back in a problem state again and complains about insufficient address space for it to load. __________________ Intel C2D E6850 8GB Corsair DDR2 800 Abit IP35 Pro BFG 8800GTXOC2 Auzentech X-Plosion WD1500ADFD Pioneer DVR-710 PCP&C Silencer 610 TT Tsunami Westinghouse LVM-37W3 Folding for Team# 35216 : Nv News + OSNN + SP
(Offline)

02-16-2008, 05:16 PM	#4
SRTDodge05 Grab Life By The Balls Join Date: Jan 2003 Location: Michigan Posts: 7,817	Re: A8R32-MVP w/4GB Check to see if there is a bios update you can get.
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode