DFI NF4 Thread - Page 778

Eldonko · 01-18-2006, 01:02 PM

Wow nice, that is huge!

tarrcm · 01-18-2006, 02:48 PM

yea, not too bad at all. I'ld be doing some benching but we're having horrific winds & power outages. Got two UPS's going though.

tarrcm · 01-18-2006, 02:52 PM

I did get 32M down to 20m 50s the other day but I'm saving that for later.

tarrcm · 01-19-2006, 01:31 AM

I thought I'd see what was available for Redline 1GB kits (2x512), maybe get another set...ha ha, no such luck. Apparently they've sold out.

Not sure how good the next shipment will be.

Eldonko · 01-19-2006, 02:04 AM

Redline is discontinued. There will probably be no more shipments.

CanadianDude · 01-19-2006, 09:22 AM

Just an update on the USB problem I had (still have) with my DFI UT Ultra-D and my Razer Diamondback Special Edition mouse. To recap: Occasionally, when I booted up my system, the Razer mouse would not be found. I would have to navigate with the keyboard to the Razer drivers on my HD and start to install them again and part way into the install, the mouse would suddenly function.

I read a review of the Copperhead mouse by Razer and the reviewer mentioned the same problem with that mouse. There was no real solution other than to ensure you have your mouse software updated. Now, I thought this might be the same problem as with my mouse yet....last week, ALL of my USB devices disappeared! I have no idea what is causing this to happen. A simple reboot fixed the problem but it is very annoying! Anyone have any suggestions? I have changed the USB power jumper on the DFI board already and that has not helped.

Eldonko · 01-19-2006, 10:14 AM

Which NF4 drivers you using? Which BIOS?

tarrcm · 01-19-2006, 10:16 AM

Quote:

Originally Posted by Eldonko

Redline is discontinued. There will probably be no more shipments.

You know, I read that a week or so ago somewhere & didn't believe it...doesn't make any sense. Too bad!

Blue078 · 01-19-2006, 10:22 AM

The razorback that I "HAD" did the same thing. In a Ultra-D, and The Neo2.

The solution I found ws to throw it in the trash, and pick up a Logitech Mx518. Liked it so much I upgraded to the G5.

Not what you want to hear I'm sure.

tarrcm · 01-19-2006, 10:31 AM

This amazes me, shaved 8s off Super Pi 32M

The thumbnails are both at 3483MHz!!! I am anxious to get into the higher freq range of my old PB's. Thanks Eldonko...YOU DA MAN

Eldonko · 01-19-2006, 10:36 AM

Congrats buddy

Eldonko · 01-19-2006, 10:37 AM

Anyone here ever order from www.pccanada.com ? They are one of the few places left with opti 146s that are not way overpriced. NCIX is charging over $320CAD for 146, almost double what they had it for 3 weeks ago.

CanadianDude · 01-19-2006, 12:30 PM

Quote:

Originally Posted by Blue078

The razorback that I "HAD" did the same thing. In a Ultra-D, and The Neo2.

The solution I found ws to throw it in the trash, and pick up a Logitech Mx518. Liked it so much I upgraded to the G5.

Not what you want to hear I'm sure.

Lol, nope not what I want to hear. Problem is that I am left-handed and the MX518 is made for righties (as are most mice). The Razer os a neutral design and it really helped reduce the strain that my hand went under with mice that were designed for righties.

ELDonko.....I'm using the 6-23 BIOS with the 6.70 NF4 drivers and 81.98 video driver.

CanadianDude · 01-19-2006, 12:42 PM

Quote:

Originally Posted by Eldonko

Anyone here ever order from www.pccanada.com ? They are one of the few places left with opti 146s that are not way overpriced. NCIX is charging over $320CAD for 146, almost double what they had it for 3 weeks ago.

I've never used them or heard of anyone who has. $320CDN for the Opty146 is way overpriced! www.vibecomputers.com has the Opty148 in stock for $277.76 but the Opty 146 there is backordered.

xgman · 01-19-2006, 12:54 PM

Quote:

Originally Posted by CanadianDude

Lol, nope not what I want to hear. Problem is that I am left-handed and the MX518 is made for righties (as are most mice). The Razer os a neutral design and it really helped reduce the strain that my hand went under with mice that were designed for righties.

ELDonko.....I'm using the 6-23 BIOS with the 6.70 NF4 drivers and 81.98 video driver.

Yes those mice have intermittent usb issues.

01-18-2006, 01:02 PM	#11656
Eldonko Revolutionary Mule Join Date: Nov 2004 Location: Calgary, AB Posts: 2,987	Wow nice, that is huge! __________________ PM me for Mushkin questions or support.
(Offline)

01-18-2006, 02:48 PM	#11657
tarrcm Registered User Join Date: Aug 2005 Location: Lewiston, Maine Posts: 863	yea, not too bad at all. I'ld be doing some benching but we're having horrific winds & power outages. Got two UPS's going though. __________________ FX57_DFI Expert_Crucial Ballistix Tracers_Mushkin Redline XP4000's_Turbo-Cool 850W
(Offline)

01-18-2006, 02:52 PM	#11658
tarrcm Registered User Join Date: Aug 2005 Location: Lewiston, Maine Posts: 863	I did get 32M down to 20m 50s the other day but I'm saving that for later.
(Offline)

01-19-2006, 01:31 AM	#11659
tarrcm Registered User Join Date: Aug 2005 Location: Lewiston, Maine Posts: 863	I thought I'd see what was available for Redline 1GB kits (2x512), maybe get another set...ha ha, no such luck. Apparently they've sold out. Not sure how good the next shipment will be.
(Offline)

01-19-2006, 02:04 AM	#11660
Eldonko Revolutionary Mule Join Date: Nov 2004 Location: Calgary, AB Posts: 2,987	Redline is discontinued. There will probably be no more shipments. __________________ PM me for Mushkin questions or support.
(Offline)

01-19-2006, 09:22 AM	#11661
CanadianDude Registered User Join Date: Sep 2004 Location: Currently in Hallunda, Sweden Posts: 264	Just an update on the USB problem I had (still have) with my DFI UT Ultra-D and my Razer Diamondback Special Edition mouse. To recap: Occasionally, when I booted up my system, the Razer mouse would not be found. I would have to navigate with the keyboard to the Razer drivers on my HD and start to install them again and part way into the install, the mouse would suddenly function. I read a review of the Copperhead mouse by Razer and the reviewer mentioned the same problem with that mouse. There was no real solution other than to ensure you have your mouse software updated. Now, I thought this might be the same problem as with my mouse yet....last week, ALL of my USB devices disappeared! I have no idea what is causing this to happen. A simple reboot fixed the problem but it is very annoying! Anyone have any suggestions? I have changed the USB power jumper on the DFI board already and that has not helped.
(Offline)

01-19-2006, 10:14 AM	#11662
Eldonko Revolutionary Mule Join Date: Nov 2004 Location: Calgary, AB Posts: 2,987	Which NF4 drivers you using? Which BIOS? __________________ PM me for Mushkin questions or support.
(Offline)

01-19-2006, 10:22 AM	#11664
Blue078 BB Stacker Join Date: Apr 2003 Location: Dallas TX Posts: 2,391	The razorback that I "HAD" did the same thing. In a Ultra-D, and The Neo2. The solution I found ws to throw it in the trash, and pick up a Logitech Mx518. Liked it so much I upgraded to the G5. Not what you want to hear I'm sure. __________________ DFI SLI-D r.AA0...BIOS 702-2...3700+...7800GTX...2x1g Ballistix..PCP&P 510SLI ...Creative XFi...Promedeia Ultra 5.1's...2005FPW...Cooling by Prometeia and Thermaltake
(Offline)

01-19-2006, 10:36 AM	#11666
Eldonko Revolutionary Mule Join Date: Nov 2004 Location: Calgary, AB Posts: 2,987	Congrats buddy __________________ PM me for Mushkin questions or support.
(Offline)

01-19-2006, 10:37 AM	#11667
Eldonko Revolutionary Mule Join Date: Nov 2004 Location: Calgary, AB Posts: 2,987	Anyone here ever order from www.pccanada.com ? They are one of the few places left with opti 146s that are not way overpriced. NCIX is charging over $320CAD for 146, almost double what they had it for 3 weeks ago. __________________ PM me for Mushkin questions or support. Last edited by Eldonko : 01-19-2006 at 12:12 PM.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode