ABXZone Computer  Forums

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-07-2004, 07:35 AM   #1
Registered User
Join Date: Feb 2003
Posts: 211
Prescott and Motherboard Support

Found this on PC Stats.
Intel claims that most motherboards will work fine with a BIOS update, which third-party board vendors are expected to release. There's a chance that older Socket 478 motherboards are simply incompatible, though.

How serious is the problem, you ask? We tested a total of eight motherboards, randomly sampled from our test systems, for Prescott compatibility. Of the eight, only three actually worked, including the D875PBZ that Intel sent with the Prescott sample, ABIT's IC7-MAX3, and ABIT's AI7. Those boards that didn't work were ASUS' P4C800-E, AOpen's AX4C Max, two of Intel's D865PERL, and an older D875PBZ.

Although the ABIT IC7-MAX3 and AI7 successfully booted into Windows, neither motherboard properly recognized Prescott’s clock multiplier, in both cases reverting back to 2.8GHz. Each board was flashed to the latest publicly available BIOS, but ABIT clearly has some work to do before touting full Prescott compatibility. Consequently, we weren’t able to overclock the Prescott core at 3.2GHz. The only remaining platform with which to test, Intel’s D875PBZ, is limited to a four percent “Burn-in” mode that doesn’t facilitate aggressive FSB manipulation.

P4 3.0E Prescott @3.6Ghz, P4S800D-E Rev1.04, 512mb Adata DDR450,512mb, 2x80gb Seagate Barracuda7200.7 SATA Raid0, 40gb WD 7200rpm. MSI Ti4200, Liteon 163 DVD, Liteon 48x12x48 CDRW. WATERCHILLED.
(Offline)   Reply With Quote

Advertisement [Remove Advertisement]

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBulletin® Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com

© 2006 - 2016 ABXZone Forums | About ABX Zone Forums | Advertisers | Investors | Legal | A member of the Crowdgather Forum Community